Announcement

Collapse
No announcement yet.

Residual current absorption on cluster

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Residual current absorption on cluster

    Hello, during my vacation, I left my E30 parked for about 3 days and forgot to disconnect the battery. Well, after only three days the battery was discharged.
    Perhaps, it was not that good, however there was clearly something.
    So I began some measurements and found out that something in the cluster absorbs current.
    With the negative cable disconnected from the battery, I measured, between negative post and ground, about 70mA. When I disconnect the blue connector of the cluster (Motometer), the residual current is about 4mA.

    What does that connector connect? What can I check in the cluster?
    I need to reduce the circle of the possibilities as much as I can, I'm worried about problems to the cluster...


    #2
    Try here first...

    http://www.wedophones.com/BMWManualsLead.htm
    sigpic
    Steve Corbett
    1983 528E Scrapped
    1983 528E Sold
    1984 745I
    1984 325E - Sold
    1989 325I Bronzit-Sold
    1989 325I Zinno
    1988 635CSI

    Comment

    Working...
    X