I Just installed a car stereo amp and my tach died post install.
I did remove/reinstall the car battery during amp install and did get a little spark when installing .
I checked fuses 10/21 and PO had put 10A fuses instead of 7.5 but neither was blown.
I replaced 10/21 with 7.5amp but tach ist still dead.
I also unplugged my power antenna at the antenna in the trunk since I didn't want it going up and down since I dont use the radio. I plugged that back in in case it was related.
I don't see any blown fuses.
Given that I spark'd my battery and had 10 amp fuses instead of 7.5 , any thoughts on how to fix my tach - or do I need to send it in for a fix. I don't have a spare tach to check
thanks.
I did remove/reinstall the car battery during amp install and did get a little spark when installing .
I checked fuses 10/21 and PO had put 10A fuses instead of 7.5 but neither was blown.
I replaced 10/21 with 7.5amp but tach ist still dead.
I also unplugged my power antenna at the antenna in the trunk since I didn't want it going up and down since I dont use the radio. I plugged that back in in case it was related.
I don't see any blown fuses.
Given that I spark'd my battery and had 10 amp fuses instead of 7.5 , any thoughts on how to fix my tach - or do I need to send it in for a fix. I don't have a spare tach to check
thanks.
Comment