My 318is didn't come with the factory premium sound, however, there are tweeter wires in the car. I found the ends of the wires down my the stock mids (matched the colors), and tried to use them to wire up some aftermarket tweeters. I couldn't get them to work for some reason. Do they go through a harness or something? Any one else used the factory tweeter wires for their aftermarket audio set up?
Announcement
Collapse
No announcement yet.
Stock Tweeter Wires
Collapse
X
-
Ken, those tweeter wires are there and I have never had an issue getting them to work.
I have had a hell of a time finding the right ones though...dig deeper in the harness that goes into the carpet. There is one wire tied up basically under the carpet.
GL!
Hey.. I am still gonna bring you a couple of sets of grilles if I get to come to PDX...I am just buried in the HUGE freeking home theater install. The drywallers started drywalling a week ahead of schedule.
Luke
-
tweeter wiring.
Originally posted by oni View Postdon't crossovers come in different frequency settings?
do you have to modify the front premium speakers or just wire in the new crossovers?
If you get the high end speakers the crossover is built into the woofer.
If not, you need a crossover, most tweeter kits come with a crossover.
You can just connect the tweeter wires or crossover to the front speaker wires. tweeters don't hardly consume any power.
Comment
-
tweeter wiring
Originally posted by kencopperwheat View PostMy 318is didn't come with the factory premium sound, however, there are tweeter wires in the car. I found the ends of the wires down my the stock mids (matched the colors), and tried to use them to wire up some aftermarket tweeters. I couldn't get them to work for some reason. Do they go through a harness or something? Any one else used the factory tweeter wires for their aftermarket audio set up?
If you take a closer look at the wire colors you will find that one of them is very close, but not the same.
Follow the main wiring loom down, just under the carpet (or around that area) and you will find another connector taped to it, this one should have the same color wire as the ones in the door where the tweets mount.
You don't need to run new wires just for the tweets.
Comment
-
Originally posted by new2bmw View Postwould it be a good idea to run all new wires and bypass the factory setup but use the factory speakers? i am installing new headunit and seems like it may be the way to go.
That would be a huge waste of time, plus you'd be adding uneeded weight.
I installed my headunit and front high-end speakers with tweets off of the stock wiring, it's very simple.
Comment
Comment