Car alarms, need suggestions. Any help is appreciated.

[sk8ercof316]

Hey SK8er...see if "Kylebes" might want to install it for you.

He is a whore...PM him. I will too, you guys are both in Jaaawja and aaawl.

Luke

Thanks. But, I live in athens. But I wouldn't mind driving to atlanta if someone is going to help me install my alarm system(once I get it). Heck, I would even pay him to do it. Thanks Luke.

[frost_dxb]

Who you calling baldy?

sorry typo error mate i mean badly :p

[StereoInstaller1]

sorry typo error mate i mean badly :p

I knew that...but I do have a severly receding hairline.

Anyway, here is what wires you need:


12volts red + ignition harness

Starter black/yellow + ignition harness

Ignition green + ignition harness

Second Ignition purple + ignition harness

Power Lock yellow/blue - drivers kick
Power Unlock green/blue - drivers kick
Notes: Remove drivers kick panel speaker, remove plastic cover below speaker, remove the two screws to pull relays. Keep relays upright.

Parking Lights gry/wht and gry/yel + light switch

Door Trigger brown/purple - dome delay relay dkp

Trunk/Hatch Pin brown/black - at trunk light
Notes: Brown/purple on convertibles.

Tachometer black AC diagnostic connector

Brake Wire green/red + brake switch

[franco90]

For under $100 (not much under...but under) I will send you a Scytek Galaxy 5000...full alarm with remote start, keyless, etc, and all the necessary relays, connectors, etc.

Check out their page if you might be interested: www.scytek.net

Luke

Luke how much shipped to 60088 also Can you pre-wire it for me. I mean the relays for the light ,etc. thanks franco
How hard is it to DIY.

[StereoInstaller1]

Luke how much shipped to 60088 also Can you pre-wire it for me. I mean the relays for the light ,etc. thanks franco
How hard is it to DIY.

Franco, I almost always have 4 or 5 Galaxy 5000 in stock...but as of saturday, I have none.

Let me get some on order, I will PM you a price. Figure under $100 shipped, including relays and an extra LED if you want it.

I can prewire, but you would have no issues at all doing it yourself.

Luke

[franco90]

Luke let me know.

[DaveSmed]

Ditto, i'd be interested in two to 19021.

[StereoInstaller1]

I expect to be ordering tomorrow.

If you guys are certain, call me!

541-747-1171

Thanks!
Luke

[TwoJ's]

luke, which galaxy 5000 would you be selling for $100? There are several different models on their site.

What could you sell the 5100rs for? And what's the LCD display on the remote good for? It's 2 way, so I'm assuming it just tells you if your alarm is going off while you are close to teh vehicle. What's your overall opinion of the alarm? It seems like it's got good features for the price.

[TwoJ's]

Power Lock yellow/blue - drivers kick
Power Unlock green/blue - drivers kick
Notes: Remove drivers kick panel speaker, remove plastic cover below speaker, remove the two screws to pull relays. Keep relays upright.

Door Trigger brown/purple - dome delay relay dkp

In the first part you say remove relays for what purpose? To connect the wires from the alarm harness? And the door trigger dome relay... dkp means driver's kick panel?

And what's the "second ignition wire" do?

[DaveSmed]

I expect to be ordering tomorrow.

If you guys are certain, call me!

541-747-1171

Thanks!
Luke

Sorry about not getting back to you sooner, but I am interested. How would you like to sort out payment?

[StereoInstaller1]

Dave, it is best for me to take Visa over the phone.

Call me at my shop: 541-747-1171

Thanks!
Luke

[Tavern Gnome]

Hey Luke, if I bought one of those alarms from you, what is the going rate for an install at a shop? My colorblind ass won't even attempt it. Ballpark? Thanks

[StereoInstaller1]

Hey Luke, if I bought one of those alarms from you, what is the going rate for an install at a shop? My colorblind ass won't even attempt it. Ballpark? Thanks

What? Colorblind?

Honestly, I have no clue what Sea-Tac labor rates are...but maybe Criv or someone would help. It really is not that tough.

[Tavern Gnome]

What? Colorblind?

Honestly, I have no clue what Sea-Tac labor rates are...but maybe Criv or someone would help. It really is not that tough.

Yeah, I'm color retarded. I have a hell of a time doing wiring stuff because of it. I can get a headunit in but an alarm might be a little more trouble than its worth. Thanks.