I am trying to tuck and reorganize my wires (the headlamp harness) and I am not totally sure what these plug-ins are used for. I have a 1984 Euro 323i. The first picture of the "white" connector w/ color wires gray/yellow and brown, it is located on the driver side, i am thinking is the fan-switch? The pic of the 2 black connectors, I know the smaller black one is for the windshield reservoir pump but don't know about the bigger one w/ color wires purple/black and brown, these are located on the passenger side along with the windshield reservoir, Yes, I know that the brown wire is for ground. I tried looking for wire diagrams on the net for this car but cannot seem to find the right diagram. I read somewhere that the 1985 318i and e21 320i shares similar color codes to the 1984 Euro 323i but I cannot seem to find these colors. The car came without power-steering, the radiator didn't have a fan-switch connected to it, and no AC.
The front headlamp harness consist of the following connectors, which i already sorted out:
1. driving lights
2. high beam
3. signal lights
4. fog lights
Now it's those 2 connectors that I do not know where they go.
Pics below for your view:
The front headlamp harness consist of the following connectors, which i already sorted out:
1. driving lights
2. high beam
3. signal lights
4. fog lights
Now it's those 2 connectors that I do not know where they go.
Pics below for your view:
Comment