How to remove Defrost & Hazard buttons

[spyder918]

Any tips on how to remove these buttons to get to the 2 screws without damaging/scratching the buttons?

[Zambuzan]

https://www.youtube.com/watch?v=YMylZMgWlP0

[spyder918]

Yeah saw that video..they definitely don't come out as easy as he shows..just grabbing them with a pair of needle nose.

[roguetoaster]

I strongly suggest removing a blank panel with something like a suction cup for optimal results, as this allows you to push the buttons out from behind.

Alternately, use a plastic trim tool and go after the switch that wiggles the most and then proceed as above.

[spyder918]

I strongly suggest removing a blank panel with something like a suction cup for optimal results, as this allows you to push the buttons out from behind.

Alternately, use a plastic trim tool and go after the switch that wiggles the most and then proceed as above.

thank you!

[Zambuzan]

Yeah saw that video..they definitely don't come out as easy as he shows..just grabbing them with a pair of needle nose.

All I do is pop my radio out far enough to where I have enough clearance to push out one of the buttons from the back with my finger. Easy peasy.