Rear moulding on quarter panel

[wcipolli]

I'm need a drivers side rear moulding on the quarter panel

Last 7 of my vin: 1928737

From realoem: http://www.realoem.com/bmw/enUS/show...diagId=51_0760

MOULDING FENDER REAR LEFT 51131953931 NLA
MOULDING FENDER REAR RIGHT 51131953932 NLA
MOULDING FENDER REAR LEFT 51131932877
MOULDING FENDER REAR RIGHT 51131932878 NLA

Is it really possible that one side would be NLA and the other wouldn't? Is this available aftermarket? Is part number 51131967136 compatible?

Are the parts from the sedan, 51131876133 and 51131876134, compatible?


I'm also looking at replacing the pin-stripe does anyone know which is red and charcoal?

http://www.realoem.com/bmw/enUS/showparts?id=BB13-USA-05-1987-E30-BMW-325i&diagId=51_0860

[cory58]

Someone else will have to answer your other questions, but I can tell you for sure that one trim piece can be available and the same piece for the other side be NLA. I've encountered this several times on my touring. For BMWs this old, a lot of the trims parts haven't been made in a while and they become NLA when the existing stock sells out.

[Das Delfin]

your best bet would be someone parting their car out. Check craigslist; there's someone right now in enfield with an early model convertible

[wcipolli]

I have one, I was just hoping to replace all the trim with fresh pieces after a full repaint. I was able to get everything new except that one piece. I reached out to someone in Europe - maybe they'll have one floating around in the motherland.

[wcipolli]

I was able to find it here - http://www.bimmerpartsbarn.com/. It looks like they have a BMW warehouse worth of parts.

Hopefully that link can be helpful for someone in the future looking for BMW NLA parts!