The Cabrio Suspension Thread

[ToPLeSS(e30)FeinD]

just realized i havent posted in here in over a year, things have changed..



got the camber plates in the front, running 2" cut housings in the front, 6" springs and mr2 kyb agx adjustable shocks..

4.5" spring bottom of the adjuster/camaro agxs in the back..

450/650 spring rates..

wheels/ tires are 16x8 et 5/-3... around 1.5* camber in the front, 3* in the back at full bottom..

[E30Jigzaw]

you're welcome,

btw, color, never seen it on a e30, what's the name ?
bumper swapped too, nice :)

16x8" wide rims with offset between et12 to et15 should work with those tires.

Thanks :) and its RECETA Green off the e21 ... i wanted to do something different

[bradthreee]

Hi guys! I bought this car a while back and I'd really like to swap out the springs. I'm unsure of what's on there now, but they are mismatched springs as front is blue and rear is grey. I'd like to get some springs that have equal gap between the front and rear arches and allow me to run beefier tires, but on the other hand still be low. I wouldn't mind just swapping the rear as I like the way she sits in the front. Any help is greatly appreciated. Thanks!

[beybedba]

Anyone know of a way to raise the rear with out getting coil overs ? I am running ie race springs and billstein hds but my rear just sits to low :/

I was suggested of getting another set of rubber cushions and stacking them .. Anyone done this ?

Also wheels are 16x8 and tires are 225-50-16

Thanks

[ATTACH]78560[/ATTACH]

did you have to roll your fenders?

[fporro]

you can stack up rubber spring pads, they come in different thickness ... http://www.bimmerfest.com/forums/alb...ictureid=26233

[Kid_stackz214]

What's the best coilovers for the cabrio under $500 lol I just blew my suspension need something ASAP

[E30Jigzaw]

did you have to roll your fenders?

Yes the fenders are rolled ..

New wheel set up 17" rc090

[beybedba]

a cabrio with H&R sports and Billies Sports running in 225/50/r15. 15x8 et25

do i need to roll the fenders?

[CorvallisBMW]

I doubt it

[Kid_stackz214]

If I'm using 17x8 I have to roll the fenders right. I was looking at them and they stick out kind of far...

[Jdesign]

just realized i havent posted in here in over a year, things have changed..



got the camber plates in the front, running 2" cut housings in the front, 6" springs and mr2 kyb agx adjustable shocks..

4.5" spring bottom of the adjuster/camaro agxs in the back..

450/650 spring rates..

wheels/ tires are 16x8 et 5/-3... around 1.5* camber in the front, 3* in the back at full bottom..

This looks great. What did you use to adjust camber in the rear?

[Mr. Tasty]

This looks great. What did you use to adjust camber in the rear?

natural camber

[Jdesign]

natural camber

Are you 100% on that?

[Mr. Tasty]

Are you 100% on that?

yes... I have a car just as low and it has that much camber.

[Jdesign]

yes... I have a car just as low and it has that much camber.

Thanks. I was wondering because I am almost as low (about and inch higher) and my camber is only about -.5. I was wondering if the verts would be different for some reason.