Put teh old fairing on teh wood rack.
-
NEW ERA AUTO GLASS - SFV SOCAL - 818 974-3673
DREWLIENTE
1$ PShops PM me
-
returning pallets to home depot in my brothers e30. just open the sunroof and hold them down with your hand- worked like a charm-FREEDOM- is cruisin at 80, windows down and listening to the perfect song-thinking "this is it"
-The Beauty in the Tragedy-
MECHANIC SMASH!!- (you all know you do it)
Got Drop?? ;-)
Originally posted by JinormusJComment
-
^Genious!Comment
-
$40 CL special on the bike mount and fairing :D ...the rest was purchased new :(
Comment
-
This is a crappy iPhone pic, but this is my current setup which isn't complete yet.
It's the cheap eBay roof rack with Thule bike trays. No fairing yet. I plan on eventually redesigning the whole rack by building a custom frame out of metal tubing and using just one bike tray and making a wood platform on the rest of the rack to haul stuff around. I'll be reinforcing the mounts just for structural integrity. I actually really like the towers of this eBay rack, mounts perfectly to the e30 rails and feels very sturdy once tight. Only downside is no locks, but you could figure out a way to at least make it harder to steal.
Comment
-
Yakima rain gutters
Originally posted by SonnyComment
-
Here is my roof rack project which I started yesterday. Haven't quite finished it yet, but it's getting there.
I wanted one bike tray, and have the rest of the rack be a wooden platform to haul stuff around on considering the e30 isn't really the most spacious car, especially since the seats don't fold down.
So I went to my local metal supply shop, got 20ft. of 1"x1" metal tubing, had them cut it into four 5' pieces and headed up to my dads.
From there, I made some measurements, cut some stuff, welded stuff together, ground some welds down on the surface and ended up with this frame. It's kind of hard to tell in the pictures, but the legs are a bit longer on one side to make room for the bike tray:
So this is how it sits with the bike tray installed:
Made a Home Depot run:
Spent the next few hours making precise measurements so everything is proportional, drilling into the wood, and drilling into the metal on my kitchen floor with shitty drill bits. Drilling through the metal sucked and I'm so happy it's over...
And here's where I'm at right now. I'm staining the wood a dark walnut color and painting the metal frame and carriage bolt heads black so everything goes together nicely. I'm really happy with how it's turning out. I'll probably weld on a couple hooks throughout the frame to attach tie downs/bungee straps etc.
Comment
-
^wow nice work!Comment
-
-
Thanks guys! Not fully done yet. Still needs a day's worth of work and it'll be complete.Comment
-
Keep us posted.
(I always read your username as ChubbyChowder, then proceed to picture heavy-set women eating giant bowls of clam chowder.)Comment
Comment