Announcement
Collapse
No announcement yet.
DIY - E36 window switch retrofit
Collapse
X
-
Lucky for you I don't have my console in right now anyway...
Driver side
Passenger side
Leave a comment:
-
Originally posted by Eurospeed88Originally posted by golde30Originally posted by MR 325Yup, 4 wires for the E36 switch, 5 wires coming out of the E30 wiring
There are a few pics of the wiring on the first page, though.
Leave a comment:
-
Originally posted by golde30Originally posted by MR 325Yup, 4 wires for the E36 switch, 5 wires coming out of the E30 wiring
There are a few pics of the wiring on the first page, though.
Leave a comment:
-
Originally posted by MR 325Yup, 4 wires for the E36 switch, 5 wires coming out of the E30 wiring
Leave a comment:
-
Yup, 4 wires for the E36 switch, 5 wires coming out of the E30 wiring
Leave a comment:
-
Originally posted by MR 325gold, I have the same ones you have there in my car. Large white base. Both of mine have different color wires, lol
Leave a comment:
-
gold, I have the same ones you have there in my car. Large white base. Both of mine have different color wires, lol
Leave a comment:
-
Cary, are those your pictures? If so, I'll buy two of them off of you if you're only using 2. PM me
Leave a comment:
-
these are the switches i have, yet another different type from the ones listed...these are the 4 switches out of an e36 4-door...
i noticed that all 4 switches i have only have 4wires, but they are the LARGE white base and not the small white base...will these ones work??
Leave a comment:
-
ah.. that would make sense. So along those same lines, would the cars with the circuit breaker above the passenger switch not take a full current load either or is the circuit breaker just inline of the full load circuit?
Leave a comment:
-
I think the one touch switches are switching a low current draw relay, rather then switching the power window current.
The wire size is drasticly different.
Leave a comment:
Leave a comment: