blower motor /resister replacement pics
Collapse
X
-
there are so many people giving misinformation. Changing the blower motor should take 30 min max. There is nothing hard about it. -
yeah, once you know how the clip attaches its pretty easy and it goes right back in. I had more problems getting the clip off than back on.
Im installing my newer blower motor as soon as it gets here in the mail, i'll probably eat my words on this one, lol.Leave a comment:
-
blower motor /resister replacement pics
Here you go fucks. THis is what I did today in less than an hr. part #s posted at a later date

REmove cover

undo straps to the blower motor. Helps if you have picks to fit into the holes on the straps. So you dont break them

heres the power wires

can use pic to undo the clip. Has a small hole to poke into. Note the resister is located just below the blower motor. It kinda just slides in underneath. Not really shown in this pic

removed blower motor wo issues. heres now. Installation is the same way.

new resister compared to old

back of resister and how it plugs in

LOOK at where the clip attaches at the back. On my car the clip attached ABOVE the metal strip. Other cars have the clip attaching to the metal strip. If its in the proper place, then you are SUPPOSED TO be able to secure the clip with your hands.Last edited by ///M42 sport; 12-29-2010, 08:58 PM.Tags: None

Leave a comment: