So in the coarse of my engine swap, swapping an 89 i engine into an 86 eta chassis i have been doing alot of research to try to stay ahead of the curve as far as the wiring goes on this engine to make sure i dont have to go back through and trouble shoot. during this time ive looked around alot of places to get some useful info and i thought it would be nice to unify some of this information.
so here goes.
C101 Information, including specific swap info and general pinouts.
I have also recently downloaded 2 PDF files that provide information on the Motronic 1.3 computers including a technical schematic with full pinout as well as a separate pinout with connector view. I am going to contact a site admin to see if they can be hosted here, until then i guess ill send them out to you. Or you can get them yourself, you just have to join a euro bmw forum, which is where i got them.
Of course you can find the full Electronic Troubleshooting Manual's for several bmws here.
A very useful post by Jlevie on electronics diagnosis can be found here.
will be updated as necessary
so here goes.
C101 Information, including specific swap info and general pinouts.
I have also recently downloaded 2 PDF files that provide information on the Motronic 1.3 computers including a technical schematic with full pinout as well as a separate pinout with connector view. I am going to contact a site admin to see if they can be hosted here, until then i guess ill send them out to you. Or you can get them yourself, you just have to join a euro bmw forum, which is where i got them.
Of course you can find the full Electronic Troubleshooting Manual's for several bmws here.
A very useful post by Jlevie on electronics diagnosis can be found here.
will be updated as necessary