maybe when you get the car back you can take a pic so i get an idea. going to buy the bit tomorrow thanks again bud
Announcement
Collapse
No announcement yet.
Vert hard top roof rack DIY (really fits...)
Collapse
X
-
Originally posted by vvaughn View Postmaybe when you get the car back you can take a pic so i get an idea. going to buy the bit tomorrow thanks again budLooking for a 3.46 or lower LSD. Lets make a deal.
LSx e36TI coming soon
Originally posted by s0urceMan, she'd be so easy to rape
Comment
-
got my car back today
got it back from a fresh paint job and had the body shop mount the landing pads for me. he told me it took him 3 mins to do. im sure it would have taken me 3 sun rizes to get them on . heres a pic . its a bit far away but you can zoom in and see them up there. tomorrow ill take close ups
Comment
-
Here's a nice hidden detail.
Use these studs, they go from the roof bolt diameter to the roof rack bolt diameter, no need to drill out the #4 pads! The holes need to be SLIGHTLY elongated to fit, but you can do that by simply rubbing the bolt on the plastic for a few seconds. The fit it really, really good! Just need matching lock nuts, and some washers.
I also chose to cut a rubber pad to go between the landing pads and the roof to help with scratches.
Drive it hard. Maintain it well.
Convertible Technical & Discussion
A Topless Memorandum
Comment
-
Originally posted by mr2peak View PostHere's a nice hidden detail.
Use these studs, they go from the roof bolt diameter to the roof rack bolt diameter, no need to drill out the #4 pads! The holes need to be SLIGHTLY elongated to fit, but you can do that by simply rubbing the bolt on the plastic for a few seconds. The fit it really, really good! Just need matching lock nuts, and some washers.
I also chose to cut a rubber pad to go between the landing pads and the roof to help with scratches.
sigpic
WTB-Strut Bar
Comment
-
finally getting around to doing this… help me clarify before i order everything.
i’ll need
4 yakima landing pad 4 (#00224 on yakima)
4 yakima control towers (SKU: #8000214 on yakima)
the 2 bars and the fairing? please correct me if i’m wrong. i’m on instagram more than r3v, so feel free to message me if you feel the need. @antftp any help is appreciated!
Comment
Comment