can you show me a before and after look of the trim on the car? I'm noobie and don't know what you mean by this "euro look."
-
-
Great write-up,plan on doing this once it warms up outside a tad.Comment
-
Pro-tip: grind/'feather' both sides of the opening. It will give the bondo/fiberglass more surface area to grab onto and it will be less likely to ghost back. Also, let it cure for a day or so before final sanding and priming, no shrinkage!
and +1 on rough sanding the filler before it hardensComment
-
Hey, this is great! I'm doing this as we speak. The fiberglass is just drying and then on to (eww) kitty hair!Comment
-
like it
Comment
-
Subscribed, but is this legal?:finger:Comment
-
SICKNESSS!!!
this looks ill.. and shoal hold up for a while.
jou ma se poes in 'n fishpaste jar.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~
Transaction FeedbackComment
-
sick... this is my next project.
OP, thanks for taking your time posting this up"i love vee tek, its a wonderful sound when you driving right by it"
If you bought anything from me, please leave a feedback here: http://www.r3vlimited.com/board/show...ghlight=drulleComment
-
Pictures of it on the car?
"The Camry is an appliance, not a car. It attracts folks who have the same regard for driving that they have for washing dishes,
i.e. it's a necessary but somewhat unpleasant chore and they want something to make the task a little easier and insulate them from the process." - my friend, Número VeintiséisComment
-
It held up great for 2 years until the kid that bought the car from me wrecked it. Only good pictures I have.
Comment
-
nice write up man! very impressed. will be doing mine within the week, ill post picsComment
-
I really want to do this. Great write up!1991 325i Calypso Coupe
Like Grandfather, Like Father, Like Son
BMW
Comment
-
Gives new meaning to "mixing stick" great write up
Comment
-
Looks clean. Nice write up!
Comment
-
your e30 is clean! Dig the side skirts and the lines it adds.Comment
Comment