Bumpers, bumpers, bumpers!

[Stephen]

I would swap the m42 into an early model. Better than hacking up an mtech1 kit IMO.

[robrez]

Bumper swap or engine swap? Or don't mix and match this pair?

Say you really like the oem Mtech I kit and euro metal bumpers. But you also really really like the M42 engine. What would be the best way to have both in one car?

Drop the M42 into a early model car then add euro bumpers and the Mtech I kit? Or retrofit euro bumpers and the Mtech I kit to a M42 plastic bumper car? I assume the different rear arches and tails on the late model car would make it a challenge to retrofit euro metal bumpers. Thoughts?

[ThaiRacer]

Well i have the metal bumper(diving boards) but where can i get the bottom half of that bumper

[Japandrew73]

So what bumpers would fit my 1986 E30? Sorry im new here

Euro or diving board. Plastic will fit, but be ready for heavy modification for the rear. The front bumper is an easy swap.

[ThaiRacer]

So what bumpers would fit my 1986 E30? Sorry im new here

[JasonC]

ok. if i wanted to swap my 88 diving board for the plastic... i would still have to drane the shocks? correct?

No, you'll have to buy the shocks for the plastic bumpers.

[E30_(1st Musk)_]

ok. if i wanted to swap my 88 diving board for the plastic... i would still have to drane the shocks? correct?

[vtman05]

Hey rockstar707, search Janderson's posts about his plastic bumper conversion on a pre 88 e30. He does some solid plastics work on the bumpers. I am not familiar, at all, with the e21 but Janderson's posts are a good place to start your research. He also picked up a plastics book, which he thought was useful. Or like kronus said, go euro because it sexy.

[kronus]

I have an 88is.. so the plastic bumpers should fit perfectly??? because people are also telling me that im going to have to drain the shocks..

Plastics will fit perfectly, if you get the shocks that mount to plastic bumpers.

I drive an 1980 320i e21 and I hate my diving board and want to get the e30 plastic bumper on there. any special considerations that i should know about?

I'm new around here and not too well read in specs and model differences etc. any help would be awesome!

That's going to be difficult. The e21 is narrower than the e30, and does not have bumper recesses, which will make e30 plastic bumpers look goofy and lumpy even if you manage to do enough bondoing to get them on there. Look into e21 euro bumpers.

[E30_(1st Musk)_]

I have an 88is.. so the plastic bumpers should fit perfectly??? because people are also telling me that im going to have to drain the shocks..

[rockstar707]

I drive an 1980 320i e21 and I hate my diving board and want to get the e30 plastic bumper on there. any special considerations that i should know about?

I'm new around here and not too well read in specs and model differences etc. any help would be awesome!

[David Alejandro]

Then why did i need to drill 2 holes on mine when i did it? Sounds like modifacation to me. Bumper shock mounts need a little modding too.

I put a US plastic bumper on my US 85 e30, with the original 85 valence and a Euro (pfeba) shark lower. NO MODS WHATSOEVER. I drilled no holes, I'm curious as to where the holes you drilled are and what they are for? You did use the plastic bumper shocks, right? (I have seen someone who used his "tucked" shocks off his original alu bumper - it seemed to work ok, but he used spacers at the top of the bumper mounting pylons to keep the plastic bumper at the right height)

[e30s52]

/\ I think just his name was banned not the ip. But yeah you are right they both look like crap. How could you do that to not only one car but two...

[Philo]

/\I havent been banned. But yes it does. He made a new name.

I know you haven't.

But I thought your IP gets blocked when you are banned. Eh who cares his car still looks like crap, so thats punishment enough.

[e30s52]

/\I havent been banned. But yes it does. He made a new name.