The horizontal rod("selector shaft / rod") that attaches to the transmission needs to be bent in order to clear the harmonic balancer ring on the driveshaft of some models.
Announcement
Collapse
No announcement yet.
Shift Lever and Short Shifters
Collapse
X
-
Originally posted by Guswhat is the z3 M lever like compared to the Z4 3.0? the z3 looks like it would sit higher, and therefore closer to your hand...??Originally posted by Grueliusand i do not know what bugg brakes are.
Comment
-
review:
i installed the z4 3.0 lever into my 1984 318i yesterday ( this thread really helped thanks guys) The throw is very much shorter and notchy as hell ( driven my car 4 tiems since the install) and i love how it feels.
problems : the plastic shift bushing i ordered did not fit because the radius was too big. Since aaron had replaced his, we used the one from his cabrio ( sanded to make it fit).
other than that, we didn't encounter any major problems. One other thing was we had a problem getting the selector rod back on, but that's because there was a big washer we didn't see :P after it was removed it fit well
i'll post some pictures when i have a nice camera avaiilable
Comment
-
Originally posted by MR 325So if I install the Z3 ///M shifter, will that feel the shortest because it's longest on the bottom [below the ball]?Old and improved:
Comment
-
Originally posted by nd4speedm1overall which would people say is the best kit to get? and also whats the contact info for BMA
BMA has a link a banner ad on this site.Originally posted by Grueliusand i do not know what bugg brakes are.
Comment
Comment