Taurus side skirts - modification and installation

[JasonC]

I just painted mine, and letting them dry now. But a fly landed on one of them! :-|

[KevRC4130]

I just got a set for my 4-door. Going to start the cutting and all today. Though admittedly, I'm still not really sure how to mount them. I know you said screws on the bottom... what are you screwing them into?

[ACHTUNG]

I grabbed a set 2 years ago when the pic of the red car with the borbet A's was posted. I've been letting my pair collect dust in my basement because I'm lazy like that when it comes to exterior modifications. I guess I'm going to have to dust them off and get them mounted.

[Aerton]

Scope the yards we must! I just went outside to look at the skirts on my 2000 Explorer, but I don't think so, although nice caps at end?!?

Wow...now everyone's going to do this.

Hmm...time to scope out the junkyard and find more random sideskirts that fit. :D

[VROOMCP]

robocop E30. Niiice

[Sean]

Wow...now everyone's going to do this.

Hmm...time to scope out the junkyard and find more random sideskirts that fit. :D

[golde30]

wow, i havent done that in a while. i find its much easier to slowly drive up on a 2x4. then jack the car up from there. nice write up josh.

depending on how low you are, a 2x4 isnt enough. i have to drive up on 2 2x4's to get a jack past my front subframe.

[Majikal]

picked up a set today, anxiously awaiting the rest of your write-up! :)

[e30devo]

I'll be adding more tonight, if I get time. I just realized that when installing these, you lose the stock jack point on the rockers. I may look into cutting out a section to leave a provision for the stock jack. I don't know about some of the rest of you guys, but my car is low enough to the point that I have to jack up the side with the stock jack first to get under the front, especially with the Reiger.

wow, i havent done that in a while. i find its much easier to slowly drive up on a 2x4. then jack the car up from there. nice write up josh.

[TopOfTheLine89]

can't wait to see a finished version or writeup 2.0 and to see how they look on a black car.

[Jand3rson]

Definetly looking into this. Thanks for the write up Josh!

I'll be adding more tonight, if I get time. I just realized that when installing these, you lose the stock jack point on the rockers. I may look into cutting out a section to leave a provision for the stock jack. I don't know about some of the rest of you guys, but my car is low enough to the point that I have to jack up the side with the stock jack first to get under the front, especially with the Reiger.

[Erick]

Definetly looking into this. Thanks for the write up Josh!

[JasonC]

I just got a set for my black car. They was easy to take off. All that i used was the screw driver on my Swiss Army knife. Mine came from a station wagon. And apear to be the same as a car.

[Funkmasta]

I'm just stoked that I finally found a set of sideskirts I like, and for a tiny fraction of what all the rest of them cost!

a fraction? they are far less than a fraction! haha

[87Blue325iC]

Nice - but probably won't work on a 'vert due to the deeper sides. Thoughts?