Announcement

Collapse
No announcement yet.

Need help with RPM signal.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need help with RPM signal.

    I can't seem to get the Megasquirt to pick up a RPM signal from the VR sensor with the 60-2 wheel. I have everything wired up like I was told. I also have everything in tunerstudio set up right im assuming. I know it is kind of a vague question but I really have no clue what to do.

    #2
    take a screenshot of the composite tooth logger with you cranking the car
    Build thread

    Bimmerlabs

    Comment


      #3
      I am having a problem now with everytime i turn the key on and off it keeps maxing out the engine rpm gauge and afr gauge and giving me a config error until i reflash the megasquirt. This just started happening..

      Comment


        #4
        you probably have a setting that is a config error then; post an MSQ
        Build thread

        Bimmerlabs

        Comment


          #5
          Okay here is the screen cap of tooth logger. http://imageshack.us/photo/my-images/690/31415012.png

          Comment


            #6
            Anyone?

            Comment


              #7
              Well it definitely looks wrong. Need the msq...
              Build thread

              Bimmerlabs

              Comment


                #8
                Here is a new picture of the tooth log. http://imgur.com/0lBUy

                http://uploading.com/files/3731amd8/Try3.msq/ Here is the .msq

                Comment

                Working...
                X