Announcement

Collapse
No announcement yet.

miller WAR questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    miller WAR questions

    hi
    i just installed the war, went through the setup wizzard, uploaded 4 base tunes from the ones availabe when setting up for first time at the wizzard.

    questions:
    1- how do i know where at the TCM is every tune?
    2- lets say i want to edit the rpm limit or any value in one of the tunes, when i finish doi have to save or save as? then do i have to write on the chip or not?
    3- i did evertything on question 2, but after i disconnect the chip from computer and reconnect to make sure everything is ok, i notice that the 4 tunes change positions on the 4 tabs. eg: the last tune i edit and write always changes its position to the first tab.
    4- why does the car limits rpm at 4500 in one of the TCM clicks when not any single tune is set to limit there?


    One of the best threads you will ever read
    http://www.r3vlimited.com/board/showthread.php?t=221813

    Nice trailer of my e30
    http://www.youtube.com/watch?v=TTjtG...e_gdata_player

    If i sold you something please leave feedback here
    http://www.r3vlimited.com/board/showthread.php?t=217142

    #2
    I highly suggest you forget that the TCM exists and just load the same tune to all 4 slots. every time you load a new revision to a tune it will change what position its on the TCM. figuring out what tune it is, is annoying and not worth it.

    after you change a value just hit enter and then save as a new file somewhere so you dont override the original file in case you have to go back.

    [B]ORDER PARTS-
    kamotorsperformance.com

    Comment


      #3
      Ya that shifting profiles is a glitch in their software. What you can do is load the software and load all the tunes you want and then write them each time. If you want to tell the difference just change the rev limit. As always save alllllll tunes you make. If you leave a tune blank I do believe it defaults to the default tune or tune #1 cant remember.
      sigpic"If one does not fail at times, then one has not challenged himself." -Ferdinand Porsche
      The ugly car: http://www.r3vlimited.com/board/showthread.php?t=209713

      Comment


        #4
        I spoke with brody today and he told me about the shifting positions bug. He told me to put numbers in front of the tab names. 1-2-3-4. Eg: "1 93oct 14lb"
        I did that to all the tabs saved and everything wrote the tunes on the chip and disconnected the usb. I immediatly reconnected to check, and it stii shifted the positions.
        I still have the problem on two
        Of the tunes, it limits at 4500 when i have it to limit at 4000.


        One of the best threads you will ever read
        http://www.r3vlimited.com/board/showthread.php?t=221813

        Nice trailer of my e30
        http://www.youtube.com/watch?v=TTjtG...e_gdata_player

        If i sold you something please leave feedback here
        http://www.r3vlimited.com/board/showthread.php?t=217142

        Comment


          #5
          This is a guess. But you may check to see it the toothed timing wheel is free of dirt and crud.
          sigpic"If one does not fail at times, then one has not challenged himself." -Ferdinand Porsche
          The ugly car: http://www.r3vlimited.com/board/showthread.php?t=209713

          Comment


            #6
            I'm pretty sure you cant get it to rev limit below 4.5 to 5K


            I had a 2 step tune on my with a 3.5k rev limiter and it would still rev to 5k.

            [B]ORDER PARTS-
            kamotorsperformance.com

            Comment


              #7
              ^^ yeah thats what i guessed but still didnt try though, i did write the same tune on all 4 tabs and set the limiter to 6000 and it worked perfect.. So i guess any value under 4500 it wont take effect. Im only messing with the limiter for now to see how stuff works... Real dyno tune coming soon.. Probably next week. Ill keep you posted


              One of the best threads you will ever read
              http://www.r3vlimited.com/board/showthread.php?t=221813

              Nice trailer of my e30
              http://www.youtube.com/watch?v=TTjtG...e_gdata_player

              If i sold you something please leave feedback here
              http://www.r3vlimited.com/board/showthread.php?t=217142

              Comment


                #8
                Originally posted by schtozo View Post
                ....set the limiter to 6000 and it worked perfect....d
                Why so low?
                sigpic"If one does not fail at times, then one has not challenged himself." -Ferdinand Porsche
                The ugly car: http://www.r3vlimited.com/board/showthread.php?t=209713

                Comment


                  #9
                  Originally posted by bmwguy325is View Post
                  Why so low?
                  Just trynig if it was working at all.. Its back to 6900 now


                  One of the best threads you will ever read
                  http://www.r3vlimited.com/board/showthread.php?t=221813

                  Nice trailer of my e30
                  http://www.youtube.com/watch?v=TTjtG...e_gdata_player

                  If i sold you something please leave feedback here
                  http://www.r3vlimited.com/board/showthread.php?t=217142

                  Comment

                  Working...
                  X