Announcement

Collapse
No announcement yet.

Bosch MegaSquirt Tune

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Bosch MegaSquirt Tune

    hey guys quick question my old ecu is failing and now im stuck with my daily driver being driven with a tune that I don't trust using my megasquirt ecu , I looked around the place and was wondering if anyone had a tune that would basically put my car to running megasquirt with a stock tune and not idle so horrible , the car backfires around 3000 rpm which im sure in hell is not suppose to happen but I had no choice because the stock ecu works when it pleases , when I first start the car it with megasquirt also idles horrible yes ill be getting the car tuned properly but when I have the funds and my turbo kit together I found a guy to dyno and tune my car for 600 bucks for a 3 hour run which is awesome. but atm I don't have the funds to put it toward a tune on my stroked engine just as a daily driven non turboed tune if someone could help me out it would be appreciated thanks
    Sold Black BMW E30 325IS
    1987 bmw e30 euro part out
    1990 Bmw 325i Cabrio 2.9
    Metric Mechanic 2.9 stroker
    Holset Hx35w CXRacing Manifold
    MegaSquirt ARP HeadStuds
    OEM HG AEM Methanol injection
    20psi

    #2
    Why not just buy another stock dme? They could be had for around 40-60 maybe even less

    Sent from my SCH-I545 using Tapatalk 2
    -Build http://www.r3vlimited.com/board/showthread.php?t=295277

    Comment


      #3
      honestly I wanna get rid of this maff it is friken huge.... loool and I got the iat sensor I rather see what kind of difference it would be and megasquirt basically helps allot I just need a steady tune if I find someone to do it here in Calgary for just helping me getting it to run as a street tune until I get my turboed parts together that would be great
      Sold Black BMW E30 325IS
      1987 bmw e30 euro part out
      1990 Bmw 325i Cabrio 2.9
      Metric Mechanic 2.9 stroker
      Holset Hx35w CXRacing Manifold
      MegaSquirt ARP HeadStuds
      OEM HG AEM Methanol injection
      20psi

      Comment


        #4
        there's a stock tune for the DIYpnp on DIYautotune's site that should work with any MS2 setup.
        Build thread

        Bimmerlabs

        Comment


          #5
          but wouldn't I have to downgrade the firmware on the megasquirt? and if so is there any way to get it to what I have which is 3.2.4
          Sold Black BMW E30 325IS
          1987 bmw e30 euro part out
          1990 Bmw 325i Cabrio 2.9
          Metric Mechanic 2.9 stroker
          Holset Hx35w CXRacing Manifold
          MegaSquirt ARP HeadStuds
          OEM HG AEM Methanol injection
          20psi

          Comment


            #6
            no, you don't have to downgrade.

            al you really need are the tables and curves. most of the "settings" you'd leave alone.
            Build thread

            Bimmerlabs

            Comment


              #7
              so its fine if I get those errors , when I basically accept to use that tune okay , im using the stock tune but the car still seems like its sluggish and running bad , idle is terrible so I gotta start trying to get it to idle stable it jumps around and is idleing at 650 700 wich is low and making the car drive weird and make it seem like its gonna shut off also , it dose shut off unless I rev it till it warms up a bit so im thinking I gotta adjust the idle duty cycle
              Last edited by Bmwb; 09-03-2013, 11:10 AM.
              Sold Black BMW E30 325IS
              1987 bmw e30 euro part out
              1990 Bmw 325i Cabrio 2.9
              Metric Mechanic 2.9 stroker
              Holset Hx35w CXRacing Manifold
              MegaSquirt ARP HeadStuds
              OEM HG AEM Methanol injection
              20psi

              Comment


                #8
                is your ICV even working? it sounds like it's not working at all.
                Build thread

                Bimmerlabs

                Comment


                  #9
                  it probably doesn't even work..this thing isn't idleing when I start my car with any tune I have and even with stock
                  Sold Black BMW E30 325IS
                  1987 bmw e30 euro part out
                  1990 Bmw 325i Cabrio 2.9
                  Metric Mechanic 2.9 stroker
                  Holset Hx35w CXRacing Manifold
                  MegaSquirt ARP HeadStuds
                  OEM HG AEM Methanol injection
                  20psi

                  Comment

                  Working...
                  X