Current source for M5X TPS adapters?

[thebutterson]

VAC is the only place I can find right now selling these adapters, there used to be a guy on here who sold a 3D printed version but I haven't heard back from him. Anybody know a source?

[MercyFlush]

VAC is the only place I can find right now selling these adapters, there used to be a guy on here who sold a 3D printed version but I haven't heard back from him. Anybody know a source?

If you want to make one fast just go buy some 5-6mm nylon and drill a hole as large as the ID of the Oring then it's just four holes to mount and a little bit of silicone sealant on the TB side of the mount to ensure a nice seal. Took me 10min :D

[Northern]

I thought nigel still sold those 3D printed ones

[pandaiswong]

I got mine from Frankensteined
Bottom of the page
http://www.r3vlimited.com/board/show...=340383&page=3

[e30experiment]

I thought nigel still sold those 3D printed ones

yes he does or did. I bought one from him a while ago.

I got mine from Frankensteined
Bottom of the page
http://www.r3vlimited.com/board/show...=340383&page=3

i just got one recently from him also.