TPS Plug wire change help

[Nitro Nick]

Hey Guys,

I have an M50 TPS and am now running MS2 from whodwho. He explained to me that you need to switch two wires on the plug. I'm pretty sure I switched the wrong wires. Do any of you know the color codes of the wires that are supposed to be changed for this application. I know they are all a brown variation. Want to complete the right switch tonight so any help would be appreciated. I'm currently using the stock e30 plug which work with this but the wires need to be swapped with his application. I also already have the correct adapter in pace as well.

Thanks

[whodwho]

Sorry on the delay finding this for you, this is what I had for notes

E36 TPS, pin 1 is ground, 2 is signal, and 3 is vref
E30 TPS, pin 1 is closed, 2 is ground, and 3 is open
Swap pins 1 & 2 on the E30 connector

E36 Stock wiring/TPS
1 = BRN(43) - Gnd
2 = BR/SW(12) - sig
3 = RT/GE(59) - vref

E30 Stock wiring/TPS
1 = BR/BU(52) - Closed
2 = BR(-) - Gnd
3 = BR/BK(53) - WOT

Running M5x TPS on E30 harness
1 = BR Gnd - Gnd
2 = BR/BU(52) - Sig
3 = BR/BK(53) - vRef

[Nitro Nick]

Sorry on the delay finding this for you, this is what I had for notes

E36 TPS, pin 1 is ground, 2 is signal, and 3 is vref
E30 TPS, pin 1 is closed, 2 is ground, and 3 is open
Swap pins 1 & 2 on the E30 connector

E36 Stock wiring/TPS
1 = BRN(43) - Gnd
2 = BR/SW(12) - sig
3 = RT/GE(59) - vref

E30 Stock wiring/TPS
1 = BR/BU(52) - Closed
2 = BR(-) - Gnd
3 = BR/BK(53) - WOT

Running M5x TPS on E30 harness
1 = BR Gnd - Gnd
2 = BR/BU(52) - Sig
3 = BR/BK(53) - vRef

Thanks Boss. I knew you are a busy guy that's the only reason I posted this up. Also might help some other people out.

[E30mpd]

Was that correct switching pins 1-2