Trying to start VEMS

[Maxputze]

Hello,

I’ve got an m52b28 swapped e30 and am on a very tight timeline (just the weekend) and I’ve been trying to connect to my VEMS ecu with a serial connector the issues are as follows:

1. Bottom right corner of the screen says cannot open port.

2. When I try to connect to the ecu with ignition on it says cannot find ecu.

Ive already checked and the ecu connector has ground, 12v, and an ignition pin. I tried using a straight serial cable to a computer running windows xp and three Computers using windows 10 with a usb to serial adapter.

thanks,
max

[Kershaw]

Try posting here https://www.r3vlimited.com/board/for...megasquirt-etc

[agent]

Try posting here https://www.r3vlimited.com/board/for...megasquirt-etc

Moved there.

General Discussion is not a catch-all; please do not ask technical questions there. If you don't know where to ask your question, post it in General Technical and we'll move it to the appropriate subforum if necessary. Thanks in advance.