MagnaFlow 14815 sound on m42???

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • e30BMart
    replied
    Bump. Got a reply from the dude, here is what he said: Hi Mart!

    Thanks for your interest!
    Simply it's a Supersprint Exhaust with selfmade exhaust tip which has a diameter of 80mm and i'm running stock headers and stock cat!
    The middle silencer has been completely replaced by a straight pipe with a slightly larger diameter!
    The car is also equipped with a group n ecu!
    Overall it has a nice crispy sound but for our noise regulations here in Austria it's way too loud... But who cares!! :-)

    Horsepower is around 155 and the supersprint on its own gives a little more top end power, you can even feel it!
    The reprogrammed ecu sets the rev limit to 7500rpm and has a reprogrammed fuel/ignition mapping!
    You can really feel it on this engine!

    Best regards

    Gernot

    Can you guys decode this?

    Leave a comment:


  • nando
    replied
    no I think you are right. Even if they did, it's unlikely somebody would spend the $1500 or whatever it would cost for the entire setup.

    Leave a comment:


  • gverelli
    replied
    ^^ I did not think that SS made anything else besides a catback, that's why I took an educated guess, I could be wrong??

    Leave a comment:


  • nando
    replied
    Originally posted by Wh33lhop
    I find your logic to be flawed sir. That is a great leap from "supersprint exhaust" to "supersprint catback."
    does SS make anything for an M42 but a catback?

    Leave a comment:


  • e30BMart
    replied
    I find your first link one a bit fartcanny, I need to know the details of the link I posted but the guy isn't answering me, ARG, I kill :evil:

    Leave a comment:


  • gverelli
    replied
    Originally posted by Wh33lhop
    I find your logic to be flawed sir. That is a great leap from "supersprint exhaust" to "supersprint catback."
    True say. With a vague description as that it can probably be anyones guess what it is, I was just guessing its a supersprint catback because the youtube description said "equipped with a supersprint exhaust", so it was an educated guess...kinda

    But for the OP, found this vid and sounds excellent.



    and this one,

    Leave a comment:


  • Wh33lhop
    replied
    Originally posted by gverelli
    The youtube description just says its a supersprint exhaust. So Im guessing a supersprint catback.
    I find your logic to be flawed sir. That is a great leap from "supersprint exhaust" to "supersprint catback."

    Leave a comment:


  • gverelli
    replied
    Originally posted by e30BMart
    Found a good sounding one, anyone know the details of it? http://www.youtube.com/watch?v=c8DG0e_kQeI
    The youtube description just says its a supersprint exhaust. So Im guessing a supersprint catback.

    Leave a comment:


  • e30BMart
    replied
    Found a good sounding one, anyone know the details of it? http://www.youtube.com/watch?v=c8DG0e_kQeI

    Leave a comment:


  • e30BMart
    replied
    Bump.

    Leave a comment:


  • e30BMart
    replied
    Originally posted by devon.818
    mine sounds just like and/or better, to me atleast.
    i cut the muffler off and put some 1 3/4 pipes to 2" tips. sounds beastly.
    i tried to do a soundclip with my phone, but messed up, gonna try again a lil later if you want to hear it...
    I would LOVE to hear it thanks!

    Leave a comment:


  • trackjunkie21
    replied
    you need 2 more cylinders, no way you can make it sound like that I'm afraid.

    Leave a comment:


  • devon.818
    replied
    mine sounds just like and/or better, to me atleast.
    i cut the muffler off and put some 1 3/4 pipes to 2" tips. sounds beastly.
    i tried to do a soundclip with my phone, but messed up, gonna try again a lil later if you want to hear it...

    Leave a comment:


  • e30BMart
    replied
    Bump

    Leave a comment:


  • e30BMart
    started a topic MagnaFlow 14815 sound on m42???

    MagnaFlow 14815 sound on m42???

    Hey, I was planning on getting a 325i and slap a 14815 in because I just freaking love the sound it makes. But I ended up getting a 1991 318is and although my stock exhaust is fine, I would love nothing more to get it sounding as close as possible to a 14815

    I know its a 4 and all but does anyone know what I can do to make it sound like that??? Exhaust or more!:D:D:D??

    thanks so much heres the vid:http://www.youtube.com/watch?v=pwKOn19wK9U
Working...