Best Muffler for stock m20 for street use.

[supkev]

Depends on you you can build a system to sound like either of those for the fraction of the price and then again you're paying for a brand name in the end.

[supkev]

Much like ebay long tube headers for e30, e36, e46. All work the same are the same gain they are just reps of each other not one makes more power than another. Same question it's up to you race land(Supersprint reps) or Supersprint?

[stephenp95]

On the topic of exhaust. Does anyone know of any name brands that sell longtube m20 headers ? I can only find crappy ebay ones. The best ones i found were 340 on ebay, german made/tuned. No brand :( id prefer it come into a single pipe too, dual in/out mufflers are hard to find.

Sent from my SCH-I605 using Tapatalk

[Herr Faust Schinken]

Stalhe and IE both sell Long tube m20 headers

[Bullet Ride]

On the topic of exhaust. Does anyone know of any name brands that sell longtube m20 headers ? I can only find crappy ebay ones. The best ones i found were 340 on ebay, german made/tuned. No brand :( id prefer it come into a single pipe too, dual in/out mufflers are hard to find.

Sent from my SCH-I605 using Tapatalk

You missed the group buy ;)

http://www.r3vlimited.com/board/showthread.php?t=304402

[essi1553]

Emailed the company.

EDIT: $439!! Sorry.

What exactly did you say to them to get the price from $665 to $439? I wouldnt mind spending $439 for that exhaust new!

http://www.stromungexhaust.com/325i-325ix--dual-tip-special-order-only.html

[stephenp95]

FUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU

Sent from my SCH-I605 using Tapatalk

[Bullet Ride]

FUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU

Sent from my SCH-I605 using Tapatalk

But yeah, you can buy the exact same headers from IE, except that the primaries are 1.5" rather than 1.375", because it wouldn't be cool to copy Tubular's design verbatim

http://www.iemotorsport.com/bmw/E30-exhaust/M20STG2.html

[stephenp95]

Ugh 500 for headers that arent even coated :(

Sent from my SCH-I605 using Tapatalk

[stephenp95]

Think im gonna go with these :

http://m.ebay.com/itm/281236873560?cmd=VIDESC

Sent from my SCH-I605 using Tapatalk

[whoismaxjulien]

Spintech

Ive been thinking to use these too.... witch ones have u heard or do u use? The 6000? 9000?

[LJ851]

what exactly did you say to them to get the price from $665 to $439? I wouldnt mind spending $439 for that exhaust new!

+1

[Bullet Ride]

Ugh 500 for headers that arent even coated :(

Sent from my SCH-I605 using Tapatalk

You probably don't realize that just to get a good coating on a set of headers is anywhere from $150-$200 per set. The volumes of headers they sell is low... so good luck selling a set of headers for $300 and not living below the poverty line.

Think im gonna go with these :

http://m.ebay.com/itm/281236873560?cmd=VIDESC

Sent from my SCH-I605 using Tapatalk

If those are as good as they look. That's a wicked deal, especially for stainless. Over here it would cost that much just to make stainless headers, let alone sell them for a profit.

[stephenp95]

Ill post a about em when i get em #

Sent from my SCH-I605 using Tapatalk

[supkev]

Like I said ebay headers have fitment issue but they work good still. Yea Ireland engineering is good.