Blunt tech/goodNtight turbo manifolds good ?

[abused]

Now you are just wasting our time with questions already answered. Good & Tight makes some of the most brutal custom turbo builds. I AM buying one from him next year for my turbo'd 24v.

http://r3vlimited.com/board/showthread.php?t=185900

http://r3vlimited.com/board/showthread.php?t=175091

There is no need to question the mani, it is 100% well made in the US. And backed by blunt(the latter is enough on it's own).

I'm not trying to waste your time I was just looking for info. I just saw it on eBay and was a bit hesitant that all. But thanks for the feedback.

[F34R]

I'm not trying to waste your time I was just looking for info. I just saw it on eBay and was a bit hesitant that all. But thanks for the feedback.

No problem =) it is made by a member here that does outstanding work. I would not second guess buying it one little bit. Hence the fact I am personally buying one when I undertake my turbo in a year or so.

[abused]

No problem =) it is made by a member here that does outstanding work. I would not second guess buying it one little bit. Hence the fact I am personally buying one when I undertake my turbo in a year or so.

Thanks a lot man appreciate your feedback.

[Adrian_Visser]

Now you are just wasting our time with questions already answered. Good & Tight makes some of the most brutal custom turbo builds. I AM buying one from him next year for my turbo'd 24v.

http://r3vlimited.com/board/showthread.php?t=185900

http://r3vlimited.com/board/showthread.php?t=175091

There is no need to question the mani, it is 100% well made in the US. And backed by blunt(the latter is enough on it's own).

Well made near the US sort of. Designed in the US sure. It comes with a warranty against cracks for IIRC two years. Good piece, if I was going FI I'd get one.

OP buy the damn thing and stop asking dumb questions already.

[abused]

Well made near the US sort of. Designed in the US sure. It comes with a warranty against cracks for IIRC two years. Good piece, if I was going FI I'd get one.

OP buy the damn thing and stop asking dumb questions already.

Just paid for. Thank for all the feedback.

[Farbin Kaiber]

I read in a thread that there are China made GoodNTight manifolds, is this true? I thought Otis was making them all at home.

[blunttech]

I read in a thread that there are China made GoodNTight manifolds, is this true? I thought Otis was making them all at home.

Yes this is true. Designed by Otis (GoodnTight) and made in China. But not your typical Chinese manifold. I have a buddy working in China and we flew him in several times for quality control. The result is a beefy well made piece we will stand behind. I understand brett just made 520WHP at 15PSI on pump gas on an M52 with S52 cams and no creep

[BDSax]

Yes this is true. Designed by Otis (GoodnTight) and made in China. But not your typical Chinese manifold. I have a buddy working in China and we flew him in several times for quality control. The result is a beefy well made piece we will stand behind. I understand brett just made 520WHP at 15PSI on pump gas on an M52 with S52 cams and no creep

Otis am to my house to test fit the manifolds on my m50 swap with some different turbo setups and to get the down pipes made up. these are very nice pieces.

[matt]

We have used them numerous times. They rock.

[vlawzy]

Boost creep

I'm experiencing boost creep at 6000rpm with this manifold. The wastegate port needed to be modified for better flow to wastegate. Very disappointed and pissed that I need to spend another 400 dollars to rectify the problem.

[emmanuel.dlc]

I'm experiencing boost creep at 6000rpm with this manifold. The wastegate port needed to be modified for better flow to wastegate. Very disappointed and pissed that I need to spend another 400 dollars to rectify the problem.

which wastegste?

Sent from my LG-D801 using Tapatalk

[vlawzy]

44mm tial wastegate
Take a look at that picture as an example. The good n tight is like the bottom right picture and now I need to mod it to look like the top right picture.


Sent from my iPhone using Tapatalk

[vlawzy]

Look at that wastegate port is not designed for maximum flow.

Below 6000rpm boost is good at 12psi and above 6000rpm it creeps to 21psi and wastegate is fully opened.

I d k smh


Sent from my iPhone using Tapatalk

[vlawzy]

Poor flow is my guess.


Sent from my iPhone using Tapatalk

[LowR3V'in]

Where else you going to put it on a 6 branch collector?