Originally posted by NitroRustlerDriver
VEMS is a Engine Management System :)
-
I hope it will be fast, that's the point with this Project.
VEMS is a Engine Management System :)
"The turbo from a truck is not built for much horsepower on a gasoline engine." -
The HX50 is here, and me and Nicke started to build the WG pipes and outlet.
Trust me, never again pulsplitt in a E30, totaly suckage.
I also need to modifiy my compressor housing on the turbo, and making the oilreturn is gonna be alot of work.
Testing the new snail.
This is a solution if you are running 1x BIG ASS WG, on pulsplitt ;)
The location of the WG is ok.
Outlet from WG.
"The turbo from a truck is not built for much horsepower on a gasoline engine."Comment
-
NICE, i like that alot. I feel bad for the car next to ya :DOriginally posted by PJ'92 MTech cabrio: Tesla P85 powered
IG: telsa_bimmer
'95 Alpine M3 5.3 LS, Precision 7675, TH400/Gear Vendors OD
10.4@136 pump gas at 3530lbs. (SOLD)Comment
-
Thanx dude, we are gonna fix the outlet today, it's just hagnin there as you can se on the picture.Originally posted by jon volk
Cars to right will prolly get mad at me ;)
"The turbo from a truck is not built for much horsepower on a gasoline engine."Comment
-
-
Hehe, new color this winter. I'm not guilty for painting the car orange :DOriginally posted by Axxe
"The turbo from a truck is not built for much horsepower on a gasoline engine."Comment
-
i hope your going to put some protective something around the hole where the WG is exhausting. I can imagnie the heat peeling the paint and lots of other unkind things.
a ring of stainless steel around it would be hot!
Also, you may want to give that pipe some more room to move around as the engine will probably be flexing a good bit under boost!
but perhaps you've thought of these things
GL! and sweet car!
Comment
-
Hello and thanx mate.Originally posted by E30godz
Yes, an aluminium plate is manufactured as protection.
The engine is mounted stiff, and it's more room for the hole now, since that was just test mounting :)
This is what happend today :D
"The turbo from a truck is not built for much horsepower on a gasoline engine."Comment
-
This may have been answered already, but what are the little orange fittings in the top of you intake manifold?Comment
-
-
map readidngs for each runner. look at Ticco's car, he did the sameComment
-
It's fittings for: MAP, BOV, BTR, WG e.t.c.Originally posted by NitroRustlerDriver
"The turbo from a truck is not built for much horsepower on a gasoline engine."Comment
-
It won't be needed, have enough turbo to blow this in pieces a few times ;)Originally posted by Digitalwave
"The turbo from a truck is not built for much horsepower on a gasoline engine."Comment
-
It's not map readings for each runner, only one fitting is for map.Originally posted by screamingbmwe30
I don't se why you sould map read each runner :)
"The turbo from a truck is not built for much horsepower on a gasoline engine."Comment
-
just a guess. i have seen n/a car with itbs that used a map at each runner to fine tune. although these are very exspensive engines. just a guess?Comment
Comment