M30..What turbo to use?????

[tfritz]

I dont know if I will have the funds this soon, but let me know how much, I may be interested!

[Good & Tight]

Planning on getting a manifold from you when the time comes :)

I'm changing out the manifold in my car so it will be for sale soon.

[tfritz]

Planning on getting a manifold from you when the time comes :)

[Good & Tight]

How about the cam? Swap it out for the stock one?

For your HP goal leave the 292 in place and use a tubular manifold. If you go with a log style manifold use the stock cam, you will have to run more boost to achieve 450-500hp though.

[tfritz]

How about the cam? Swap it out for the stock one?

[Good & Tight]

Either one of those turbos would be a good choice.

[tfritz]

Im pretty sure a 35r can handle that much power, I have a buddy running one on his '04 sti putting down 500-550hp...

Anyone else have input on whether or not the WAR chip software is useful or not?


Also would either of these turbos be good candidates?

http://www.ebay.com/itm/Precision-SC61-SC6165SP-Turbo-NEW-T3-T4-Garrett-GT35R-/190550986252?hash=item2c5db94e0c&item=190550986252&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr

or
http://www.turbochargers.com/store/p...roducts_id/425

[sayed ali]

I think GT35r would be the cheapest choice but I'm not sure if it is can handle till 500 HP ..

Also the engine management you're running is uesless for that amount of HP ( it's may be good for max: 350 whp) .. butter to go megasquirt

good luck

[Hey_You]

T4 is larger than T3. Both are available Divided

[tfritz]

Also, whats the difference between the T3 and T4? Or is there any?


edit: Just read a little, T3 is open and T4 is divided? Also what I read stated that there are different sizes of these flanges depending on A/R?...

[tfritz]

It is an IE 292 cam.

All info on motor....
Resurfaced head (not a significant amount removed, you can still vaugely see the old gasket outline)
Reground valves
new valve seals (guides checked out within specs)
port matched
Ireland Engineering Dual Race valve springs
IE race rocker arms
IE 292 reground cam
oversized eccentrics
Korman adjustable cam gear
Factory Head gasket
ARP studs
Miller MAF
Miller WAR chip
water pump

[bmw335isturbo]

A 35R with a T4 housing would be a good setup for your power goal.
What type of cam do you have?

Good question about the cam!
mine was 292/16x High lift intake stock exhaust lift

[Good & Tight]

A 35R with a T4 housing would be a good setup for your power goal.
What type of cam do you have?

[tfritz]

It is a b35. I was thinking about 400-500 hp. It will be a street car so I want a setup that will spool relatively quick and hold throughout the powerband and be reliable. The motor already has all the headwork needed except it has a very agressive cam.

[Good & Tight]

I am doing an m30 swap this summer and the plan is to go FI down the road after the motor is in and running good. I am wondering what turbo to use. I was thinking a gt35r but i know there are many different variations and trims and such, so I dont really know what i need. I dont know much about FI right now but am reading up and trying to learn. So again, my question is, what version/trim 35r? Or what turbo/setup in general.

Thanks!

B34 or B35? and how much HP do you want?