i have a ebay 6-2-1, (got it with a cooler, turbo, fittings,2.5" tubing,couplers, hose clams e.t.c. ) for $400 local which was a good deal (kit was absolute rubbish lol).
Anyway it seems to be pretty good, the ports were fairly close to proper alignment to the gasket, right on for the head ports, one of the studs is very close to the manifold itself.
I cut the 6 into 2 banks of 3 and it was ovbious that one of the runners was really bent to get it welded up. but it still seems ok.
Then i learnt the revshift adapter suits RHD
but ill see how i go with this 6-2-1, seems to be a very much hit and miss thing. the #6 runner doesnt leave much room for dump pipe either...
Anyway it seems to be pretty good, the ports were fairly close to proper alignment to the gasket, right on for the head ports, one of the studs is very close to the manifold itself.
I cut the 6 into 2 banks of 3 and it was ovbious that one of the runners was really bent to get it welded up. but it still seems ok.
Then i learnt the revshift adapter suits RHD
but ill see how i go with this 6-2-1, seems to be a very much hit and miss thing. the #6 runner doesnt leave much room for dump pipe either...
Comment