Announcement

Collapse
No announcement yet.

.42/.48 a/r too small?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • einstein57
    replied
    Condor Speed Shop liked it.

    Leave a comment:


  • Hey_You
    replied
    Would go well on m10

    Leave a comment:


  • LowR3V'in
    replied
    Those 3L diesels don't rev out to 7k either.

    Leave a comment:


  • The Humjet
    replied
    Originally posted by sleepy350 View Post
    I understand that it is on the smaller side, but 3 liter Mercedes turbo diesels have the same specs. Just makes me wonder how it would do on a 2.5 liter gas motor. What do you guys think?
    You can't compare your m20 to a 3l diesel Mercedes motor. The turbo's on a diesel engine undersized because they're designed to have fast spooling characteristics giving more low end torque. Which is what a diesel engine is all about. Putting a turbo like that on your car will spool far to early and choke power in the top end. Go with a Holset Hx35 with a 12cm housing.

    Leave a comment:


  • e30trooper
    replied
    a super 60 ar .60/.63 would be better

    Leave a comment:


  • e30 gangsta
    replied
    shoot for a compressor side of .50+ and a backside of. 70+ as a ruff estimate.

    or just buy a hx35 with a 12cm housing

    Leave a comment:


  • sleepy350
    replied
    Originally posted by TS87325IS View Post
    Too small. You need about a .68 ar or so. And what wheels are on your car ? I like them.
    Wheels were Rotiform BLQs. 17x8 no longer have them.

    Leave a comment:


  • TS87325IS
    replied
    Too small. You need about a .68 ar or so. And what wheels are on your car ? I like them.

    Leave a comment:


  • sayed ali
    replied
    ^^ Don't waste your time with that turbo of course

    Building a turbocharged M20 is fantastic!

    Leave a comment:


  • sleepy350
    replied
    Originally posted by sayed ali View Post
    Don't waste your time my friend

    you can come out with a very strong power from an M20!
    Don't waste my time with the turbo? Or don't waste my time building a turbocharged M20?

    Leave a comment:


  • sayed ali
    replied
    Don't waste your time my friend

    you can come out with a very strong power from an M20!

    Leave a comment:


  • sleepy350
    started a topic .42/.48 a/r too small?

    .42/.48 a/r too small?

    Hey guys, I've acquired a .42/.48 a/r Garrett T3 and was wondering how well it would work on an M20. I understand that it is on the smaller side, but 3 liter Mercedes turbo diesels have the same specs. Just makes me wonder how it would do on a 2.5 liter gas motor. What do you guys think?

    Thanks in advance,
    Angelo
Working...
X