Late model Vert Turbo!

[TC|Photography]

parts list:
Rebuilt Holset HX 35 w/16 CM housing- not the most demanded size but I'm comfortable with not hitting full boost until 3500-4K with a 7K redline
3' Down pipe/exhaust
OBX manifold
36LB Injectors
Mega Squirt tuning software
Walbro 255
Turbo Smart BOV
Tial Sport Waste-gate w/7LB spring
Turbo XS Boost controller- will allow me to control boost inside the car from 7-20 PSI- most I wanna go is maybe 15 PSI. Looking to keep the car at 7PSI for commutes etc but when it calls for 15psi will be fun.
29X7X3" FMIC with 2.5" piping
ARP 2000 Head Studs
AEM Wide Band
boost/vac gauge
Stainless oil feed/return and other lines.
Clutch masters Stage 3 clutch

This is in the works. I will post pictures as time permits!

[TS87325IS]

I miss this already :D I'm glad I could give you a quickly to show you what is in store lol

[travish325]

You will have issues at 15 psi and 36lb injectors. We found out 30s max out around 10 psi possibly a tiny more.

[TS87325IS]

Ran fine for me :D

[travish325]

Ran fine for me :D

What was your duty cycle?

[kamotors]

at 12psi my 30lbers were at like 112% duty cycle WITH methanol also

[travish325]

Yerp. max recommended is 80%.


I think?

[TC|Photography]

Haha thanks TS! I'm excited for the build! I think it will all go smoothly!!!

[TC|Photography]

Read up on a lot and in prett well prepared. But as always shit happens lol.

[travish325]

What was your duty cycle?

???

[TC|Photography]

I plan on running only betweeen 7-10 psi for now. The 36Lbers should handle that easily.

[TS87325IS]

I never paid it any attention , at 18-20 was around 130's %, so I'm sure it was above 80% but never had an issue ;)

[JCarp90]

I never paid it any attention , at 18-20 was around 130's %, so I'm sure it was above 80% but never had an issue ;)

That just sounds irresponsible.

[TS87325IS]

:)

[travish325]

Might as well go ahead and get bigger lol