Good Manual Boost controllers

[reelizmpro]

Looking to raise the boost a bit and I'm in the market for a ball/spring MBC. From what I've gathered people tend to like Turbo XS and Hallman but I was wondering if anyone can vouch for any others?

[ak-]

Grimspeed.
Holds steady, has indentations to know where you set it, clicks as you turn with resistance unlike some others where you just spin and guess.

[einstein57]

I have the regulator valve style like this. http://www.ebay.com/itm/Universal-Ma...fdadd8&vxp=mtr You can go to home depot and make one yourself for much less. Pretty simple and reliable for increasing boost up to 50%

[bobross]

If i were to purchase a manual boost controller these days i would look no other than Hallman. The new pro line is fantastic; very accurate and easy to use.
The product has been on the market for many years with great success and the pro line is a recent upgrade.

http://www.boostcontroller.com/index.php?category=5

While i am sure there are cheaper mbc's on the market, consider what you are trusting with the life of your motor.

[ak-]

If i were to purchase a manual boost controller these days i would look no other than Hallman. The new pro line is fantastic; very accurate and easy to use.
The product has been on the market for many years with great success and the pro line is a recent upgrade.

http://www.boostcontroller.com/index.php?category=5

While i am sure there are cheaper mbc's on the market, consider what you are trusting with the life of your motor.

Hallman is really good and all, but I just don't like that it has no resistance while turning nor any markings to know where you left it when testing or whatever.

[TC|Photography]

+1 for turboXS

can't go wrong with the quality here.

[einstein57]

While i am sure there are cheaper mbc's on the market, consider what you are trusting with the life of your motor.

You don't trust over boost protection in mega squirt?