RHB5 turbo?

[wooty]

Good day folks
I have found in the internet, turbo by IHI RHB5 VJ11 turbo from ford probe and therefore I have a question: will it fit to my m20b25 ( I mean engine displacement and turbo size) if I want to run 0.4-0.5 bar ?

Regards

[nando]

how many liters is the ford probe engine?

My bet is it's way too small for an M20B25.

[wooty]

Well the Probe engine was 2.2 liters Inline 4(actually it's mazda's F2 engine).

[E30-323ti]

IMHO - Waaaaay toooo SMALL

They were/are small on the F2, they were a medocre upgrade used on 323GTX's (B6T, 1600cc).

You would end up with boost just off idle, and choked by 4000rpm.

[wooty]

Well I am planning to do the boost on stock motronic, it is possible to run up to 0.5 bar without modifying it! So therefore I need a small turbo, but in future it's possible to make twin turbo maybe:))))) for each 3 cylinders 1 IHI turbo, why not?:) but ofcourse I need to use MS maybe or VEMS in future, but now for just a testing how I can build turbo engine it's enough ... And in addition stock clutch will not handle more than 200whp:)
P.S it will give me a massive torque from the idle) why not?:D

[ak-]

Yes possible, but serious butt-plug.

[wooty]

Well, you are right, doing twin turbo is kind of a brainf*k. Therefore just to try I will install this turbo.

[travish325]

Any boost is better than no boost.

[nando]

not when it's so small that the exhaust restriction causes a loss in power

[wooty]

So your opinion is it's way too small !?

[SmokeE30]

I don't think he's saying it's way to small, it will work, however if your gonna spend the time/money to install a turbo why not put something decent in that you won't wanna pull out as soon as you get it running. You don't need to run a small turbo just because your using stock internals, you can set boost to be whatever your comfortable with using a appropriate sized turbo.

[wooty]

Well, you are right, I should spend more money on turbo, in fact once I want more boost, this turbo won't be useful.

[edsel1134]

Come on now let's not judge each other by the size of there turbo's you freaks
Open up the exhaust for sure first.. If u can make a single 3inch or go 2.5 duels in the down pipe using a free flowing Y pipe., ultimately do you. Shouldn't you mess with timing for .5 bar?

[nando]

what?

[edsel1134]

Sorry tapatalk only shows me two lines of text when I'm posting.. Was agreeing with previous statement on the exhaust choking it..