OK so I wound up with a precision 3231e turbo
Sent from my iPhone using Tapatalk
Announcement
Collapse
No announcement yet.
Goals and reality need some help here
Collapse
X
-
Originally posted by cream_e30 View PostThe Ford 40# injectors are perfect for your application.
Like has been said, hx35 is a bad turbo for 250... I like Garrett so would use a GT2860rs for your goal.
Sent from my SM-G960W using Tapatalk
I'll be looking into the Garrett as well and the 40lb injectors! Thank you!
Sent from my iPhone using Tapatalk
Leave a comment:
-
The Ford 40# injectors are perfect for your application.
Like has been said, hx35 is a bad turbo for 250... I like Garrett so would use a GT2860rs for your goal.
Sent from my SM-G960W using Tapatalk
Leave a comment:
-
Originally posted by varg View PostNeeds bigger injectors. HX35 is overkill for so little power, will lag like heck. Get a smaller or more modern turbo. Pointless to use such a big turbo unless you're going for big power and don't mind the lag. For 250whp go with a T3 super 60 or something, that way you get good boost response.
Thanks for the feed back! I definitely don't want Abby more lag than is necessary. I'll be looking into the super 60.
Sent from my iPhone using Tapatalk
Leave a comment:
-
Needs bigger injectors. HX35 is overkill for so little power, will lag like heck. Get a smaller or more modern turbo. Pointless to use such a big turbo unless you're going for big power and don't mind the lag. For 250whp go with a T3 super 60 or something, that way you get good boost response.
Leave a comment:
-
Goals and reality need some help here
OK I'm running ms2 23.5 lb injectors basically stock ignition.
Maf delete
Schrick 284 cam
I have a turbo manifold on the way and intend to run maybe an hx35 turbo intercooled
Am I gonna be able to put 250 to the wheels with this recipe?
Of not what am I missing?
Sent from my iPhone using TapatalkTags: None
Leave a comment: