Turbo Problem I have (MAYBE)

[ShowStopper]

you need EMS to run that properly. at the very least least, a turbo chip from TCD. Nobody who turbos their E30 ever sticks to the stock ECU for very long - it can't measure airflow above atmospheric pressure so the best you can do is fool it.

I have one with a chip already i switched it to see if the wiring fried the computer too.

[nando]

you need EMS to run that properly. at the very least least, a turbo chip from TCD. Nobody who turbos their E30 ever sticks to the stock ECU for very long - it can't measure airflow above atmospheric pressure so the best you can do is fool it.

[ShowStopper]

ok i have a 87 325e i just put in a m20b25 block and head with a ebay setup turbo. ok i had a wiring harness up in smoke so i fixed that but the car wouldnt run. it was dumping way to much fuel in the cylinder walls. so i put in a new coolant temp. sensor and put my stock injectors back in.

Now the car starts on the first turn of the key but it revs up and stays they for a bit then kicks down. I dont have the FMU hooked up yet either. but i took it for a drive and it has no power what so ever. And it spits and sputters.

I just bought a fuel injector harness and a catch can. thats what i got told at the carisle import show by a couple of people. Is this all i need ?? Any help i can get would be helpful. And i would like to put my 24lbs. injectors back in too. I am totally lost on this Completely new at this turbo stuff.

Heres a couple of pics of my setup.