ok so as a few of you know im starting in the proses of rebuilding my head, so yesterday i went to do a compression test and change my plugs while i was at it. so i did cylinder number one it had good compression ( 150 to be exact) i put in the new spark plug, tried to put the wire back on, and it would not go on. so long story short after fighting with it i looked at it and the onld plug and realized the the piece that actually clips on to the wire was still in there cause it had striped off from the old spark plug, and i ruined the wire tiring to get it out, and also everyone of the plugs and wires did the same thing so now im running on three cylinder, bought some new wires from bavauto and they should be here Wenday.
Announcement
Collapse
No announcement yet.
M10 build update
Collapse
X
-
ok well today was an interesting day. i got my parts in but i had to hunt down the ups truck and when i say hunt i mean it! i Literally got in my 3 cylinder car started up the beast and when driving around town looking for the idiot that didnt even bother going to the right door and just stuck a note on my neighbors house ( i live in an apartment). but anyway got the parts instaled it runs great. i did my compression test and passed with flying colors ( 150, 151, 149, 151). sadly i also wrecked my car a little bit lol on the test drive to much gas on a power slide on a dirt road and i ended up on a bank with a dented front left side. so on Friday im going to take it apart pound it out respray some of the front and put it back together after work . i will post pics up probably on Saturday.
Comment