M10 fuel trouble

[WhorifyingHunty]

Did you clean your grounds and check the cold start system? Did you verify the fuel pumps providing the proper pressure while cranking?

There's a barometric pressure sensor installed next to the afm, as well as an air inlet temp sensor just prior to it. Try unplugging those.

Will do on the afm sensors, I have cleaned the grounds and the fuel pumps are both giving correct fuel pressure when cranking. What should i do to check the cold start system?

[WhorifyingHunty]

http://www.r3vlimited.com/board/showthread.php?t=63249

Should i just replace my ecu? or maybe do a cold start check?