Need M10 pistons

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Smelser
    Mod Crazy
    • Feb 2011
    • 633
    #1

    Need M10 pistons

    I am searching for pistons for my M10 race car.

    I am getting most of the stuff from Ireland and rock auto.

    Had anybody found pistons cheaper then the 500-600 range for four that I have seen?

    sigpic1984 318i Total conversion to a DIRT race car.
    Check out our build on facebook @ www.facebook.com/brewstermotorsports
    Tags: None
    • boostless
      Member
      • May 2013
      • 66
      #2
      Are you looking for stock stuff or "performance" pistons?

        Comment

        • Smelser
          Mod Crazy
          • Feb 2011
          • 633
          #3
          The rules at ohsweken speedway don't really say much.
          Basically anything that gets run hard from 4-6500 rpm range. Second gear only. Slight lift on the pedal and back down hard. Using stock replacement cam. Thinking around 9.5 10 or 10.5 comp ratio.

          sigpic1984 318i Total conversion to a DIRT race car.
          Check out our build on facebook @ www.facebook.com/brewstermotorsports

            Comment

            • kronus
              R3V OG
              • Apr 2008
              • 13005
              #4
              I have some lightly-used forged JE 92mm piano tops sitting around that I likely won't use, as I don't have an M10 anymore. The problem is I don't know the CR they're intended for. They came from a turbo engine that blew within 50 miles, so maybe they're higher-comp than their previous owner thought.
              cars beep boop

                Comment

                • Smelser
                  Mod Crazy
                  • Feb 2011
                  • 633
                  #5
                  Tech guy said stock or stock replacement. Are the stock ones cast or forge?

                  sigpic1984 318i Total conversion to a DIRT race car.
                  Check out our build on facebook @ www.facebook.com/brewstermotorsports

                    Comment

                    • SkiFree
                      R3VLimited
                      • Jun 2011
                      • 2766
                      #6
                      cast ... and I owe you an email. Sorry.
                      ADAMS Autosport

                        Comment

                        • Smelser
                          Mod Crazy
                          • Feb 2011
                          • 633
                          #7
                          Lol. No rush yet. Actually if you Jer or Jeff could call one night. I wanna discuss my engine farther. Get my total set up. Planning on a January purchase. Also wanna talk carrying the IE logo. I mentioned it to Jeff when I got my bushings the other year. He laughed and said let's see how you do on the track first.
                          I also never thought of something. If I bore out my engine to the next size oversized. Does that change the head gasket I will be to use.
                          Talk to you guys soon

                          sigpic1984 318i Total conversion to a DIRT race car.
                          Check out our build on facebook @ www.facebook.com/brewstermotorsports

                            Comment

                            • Smelser
                              Mod Crazy
                              • Feb 2011
                              • 633
                              #8
                              Also. YouTube search battle with chad Smelser.
                              It's a helmet can view of Lucas Lubin. The driver if a neon. I am the yellow car battling with him. It's interesting to watch. Knowing my engine is 30 years old and tired as hell. These BMWs handle like a dream. !!

                              sigpic1984 318i Total conversion to a DIRT race car.
                              Check out our build on facebook @ www.facebook.com/brewstermotorsports

                                Comment

                                • TobyB
                                  R3V Elite
                                  • Oct 2011
                                  • 5168
                                  #9
                                  MaxSil are a bit cheaper- but the reviews are mixed.

                                  t
                                  now, sometimes I just mess with people. It's more entertaining that way. george graves

                                    Comment

                                    • cm0180
                                      Member
                                      • Apr 2012
                                      • 56
                                      #10
                                      http://www.r3vlimited.com/board/showthread.php?t=284222



                                      I have those, if you're interested

                                        Comment

                                        • TobyB
                                          R3V Elite
                                          • Oct 2011
                                          • 5168
                                          #11
                                          that would be a good way to go, especially if you can use the domes in a standard bore block-

                                          'stock appearing' for the win!

                                          t
                                          now, sometimes I just mess with people. It's more entertaining that way. george graves

                                            Comment

                                            Previous template Next
                                            Working...