M10 vacuum hose

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Wishno87
    R3V OG
    • Jul 2007
    • 6025

    #1

    M10 vacuum hose

    So one of my friends from school asked me to come by and help him with his E30 a few days ago and he is having trouble locating where this hose is supposed to attach. I flipped through my bently but did not come across any solid information. It attaches to the box with the red knob. If anyone could tell me where this goes or point me to a helpful thread that would be great.
    Attached Files
    Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
  • BBY1104

    #2
    Check the distributor, could be a vacume line from there or under the intak mani.

    On my old car, I had a vacume hose connected on distributor and dont know for sure if that was the one.

    Comment

    • Wishno87
      R3V OG
      • Jul 2007
      • 6025

      #3
      i think the red box is connected to the distributer. that car had an M10?;)
      Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

      Comment

      • BBY1104

        #4
        What else goes to the "red cap"? That might better determine what else goes to it

        Comment

        • Wishno87
          R3V OG
          • Jul 2007
          • 6025

          #5
          hmm
          Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

          Comment

          • Wishno87
            R3V OG
            • Jul 2007
            • 6025

            #6
            Does anyone still run an M10 these days?
            Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

            Comment

            • flawdaboi407
              Grease Monkey
              • Mar 2008
              • 324

              #7
              i do... and yes the vacuum hose going to the intake or dizzy. the red thing it a vent for the dizzy adance thingy.
              84' 318i m30b35 swapped!

              Comment

              • Wishno87
                R3V OG
                • Jul 2007
                • 6025

                #8
                so where should i plug it in? whats a dizzy?
                Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

                Comment

                • Jean
                  Moderator
                  • Aug 2006
                  • 18228

                  #9
                  Originally posted by Wishno87
                  so where should i plug it in? whats a dizzy?
                  Distributor, near the battery.
                  Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                  OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                  Comment

                  • Wishno87
                    R3V OG
                    • Jul 2007
                    • 6025

                    #10
                    well thats where the other end is attached. the other hose coming off the red box thing is coming from the distributer. Does this one go there too?
                    Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

                    Comment

                    • BBY1104

                      #11
                      Hmm, there might be 2? I am just not sure

                      Comment

                      • Wishno87
                        R3V OG
                        • Jul 2007
                        • 6025

                        #12
                        so basically this just routs back to the distributer?
                        Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

                        Comment

                        • flawdaboi407
                          Grease Monkey
                          • Mar 2008
                          • 324

                          #13
                          the distributor aka dizzy thingy has two lines.. one goes to the distributor and the other into the intake manifold.
                          84' 318i m30b35 swapped!

                          Comment

                          • Wishno87
                            R3V OG
                            • Jul 2007
                            • 6025

                            #14
                            Originally posted by flawdaboi407
                            the distributor aka dizzy thingy has two lines.. one goes to the distributor and the other into the intake manifold.
                            Ya so where on the intake does it go? thats what i have been trying to find
                            Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

                            Comment

                            Working...