HELP I cut part of my wiring harness

[aavani90]

Yup, I just did quite possibly the dumbest thing in my entire life. While trying to remove the carpet I was cutting the area around the heater core and I snipped about 5 wires from this cluster here. I am horrible with the electrical side of cars and have no idea what I’m in for.

Can any of the gurus identify what these wires control? To make matters worse the cut is almost underneath the HVAC box, so to splice them back together I’ll likely need to remove the HVAC box to have room to work. Any advice would be greatly appreciated, I’m furious and can’t think logically right now. Thank you.

If there’s a better area to post this in let me know.

[aavani90]

Anyone know what part of the wiring harness this is called? I’m not good with wiring diagrams, having trouble finding what the wires are for.

[It's Soda Not Pop]

Splice them back together. That's really your only option unless you want to redo the whole harness.

[aavani90]

Splice them back together. That's really your only option unless you want to redo the whole harness.

Yeah I’m going to try to do that tomorrow, any idea if the bottom portion of the HVAC Box is removable with the dash In place? I won’t have room to splice them with that in place. The box has latches on it, but it doesn’t look like there’s room to move it out once the latches are opened.