1985 325e m20b27 cranking

[Ericmc34]

Need some help with issues on my 1985 325e ran flawless before doing clutch and rear main on car but now car will start then die car only been not running for 2 weeks replaced both sensors on bellhousing new plugs and fuel pump what else would cause this from just doing a damn clutch

All the parts that I have change in past year
2 bellhousing sensors
new fuel tank
new in tank fuel pump
Spark plugs
clutch kit
Rear main
Harness
Alternator
All fuses

[82eye]

jumper the pump and see if it stays running. sounds like it's starting on the cold injector but the mains aren't kicking in.

[Ericmc34]

jumper the pump and see if it stays running. sounds like it's starting on the cold injector but the mains aren't kicking in.

I can't get it to even stay running with giving it gas

[82eye]

I can't get it to even stay running with giving it gas

did you replace both pumps or just the in-tank ? do you have fuel at the rail ? did you check pressure at the rail ?

[tomstin]

ran flawless before doing clutch and rear main

Did you replace / resurface the flywheel? Is the tang still there that the reference sensor uses? If new flywheel, is it the right one with the tang? When you replaced the reference and speed sensors, could you have reversed them?