Announcement

Collapse
No announcement yet.

turbo parts and head studs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    turbo parts and head studs

    i have an 88 325is im gonna turbo it gonna do it cheap but right gonna stress relieve mani or buy a 524 turbo diesel mani gonna rebuild the tdo5h i have from my old talon and buy the turbo kit and pipin off ebay and weld some of the intercooler pipes together so not so many brakes in it but i need to know were to get some performance head studs and maybe a headgasket im gonna pust 10 pounds on a stock build i think just let me know somethin i would really appreiciate it thanks

    are the 325 is and i and ic the same motor? the m20b25 im new to the bmw world lol i was told that with a good tune a stock rebuilt motor would hold 10psi all day no problems wit stock head gasket and aftermarket studs is this true? wats a good place to buy turbo parts for the m20 im gonna get one off ebay and try and make it better if it dont work ill buy the good shit lol just let me know wats up
    Last edited by beemere30; 05-11-2009, 11:38 AM. Reason: need more info

    #2
    goodluck!
    ///Alpinweiß II 24v 91' 318is, Alpinweiß III 99' 323i, 04' Yamaha R6 SE for sale, 00' VW GTi, 83' El Camino BURNED, 01' P71sold, 92' Miatasold

    Comment


      #3
      ARP makes good head bolts for performance applications.
      The current fleet:
      1992 325ic: 148k-171k miles
      1999 Chevrolet Tahoe LT 4WD, 114k-142k miles
      1984 MasterCraft Stars and Stripes Powerslot (not a car :D) PCM Ford 351W, 904 hours

      Comment


        #4
        The talon turbos are too small to be used individually, only good in pairs.

        Comment


          #5
          a small talon turbo with the TD manifold is going to be like putting a butt plug in the exhaust of your M20.
          Build thread

          Bimmerlabs

          Comment


            #6
            are the 325 is and i and ic the same motor? the m20b25 im new to the bmw world lol i was told that with a good tune a stock rebuilt motor would hold 10psi all day no problems wit stock head gasket and aftermarket studs is this true? wats a good place to buy turbo parts for the m20 im gonna get one off ebay and try and make it better if it dont work ill buy the good shit lol just let me know wats up

            Comment


              #7
              First, how old are you?

              Do you have a job?

              Do you have any level of patience?

              Any level of know-how?

              A homebrew turbo kit is harder than you think.

              Comment


                #8
                im 19 i have a job i have alot of know how im just a honda guy gettin into bmw lol my patience is high sometimes lol and i have a guy that knows how to put on a turbo kit and he his puttin the first that he knows of and rb26det swap into a plymouth conquest or dodge whichever the conquest is and i also know a bmw mechanic that works at a dealership so wat kinda good info can u give on turboing my car

                Comment


                  #9
                  1 word.

                  Punctuation.


                  Thanks.
                  ***Affordable Powder Coating Here:***
                  http://www.r3vlimited.com/board/show...=1#post2074588
                  *** Bay Area/NorCal Fender Rolling Here: ***
                  http://www.r3vlimited.com/board/show...29#post1989029




                  ***If you've ever bought anything from/dealt with me please add feedback!!:
                  http://www.r3vlimited.com/board/showthread.php?t=137611***

                  Thank You!

                  Comment


                    #10
                    E30tech.com
                    Originally posted by Nicademus
                    My car beats off to that car. :bow:

                    Comment


                      #11
                      emotech is definitely the the spot for OP!

                      Comment

                      Working...
                      X