stroker/rod/piston combo

[e30rapidic]

I've decided to build a stroker for my cabrio out of the various parts I have.....eta long block, 2 complete 325i engine's (one is in the car) and an M52 crank.

Is it okay to use the M52 crank with i rods? ratio would be 1.607. Will be a weekend driver so won't be revving it excessively.

Pistons - I know i'll need a new set as what I have won't work, so what would you guys recommend? +1 or +2 mm bore? Where to order?

Head work and 284 or possibly 288 cam will be going in as well.

Short question. What pistons to use with M52 crank and M20B25 rods....?

[nando]

M52 and i rods are both the same length, it already had a 1.6 RR from the factory.

[Mitch M]

Pistons - I know i'll need a new set as what I have won't work, so what would you guys recommend? +1 or +2 mm bore?

If you're going to the expense of an overbore, go big. M20 blocks are cheap.

[///e30freak]

ratio would be 1.607. Will be a weekend driver so won't be revving it excessively.

I'm building a ~2.8 with the same crank and plan to rev excessively.:drink: