m20b25 with b27 head

[e30m20beast]

Investment Idea:

lol, funny

[JTapper]

Investment Idea:

[e30m20beast]

Details on this "race" car?

for now it is the chassis with nothing inside. on suspension it has kony adjustable (all 4)with h&r lowering springs, camber plates, polyurethane bushings, new hubs and adjustable sway bar F+R. Brakes it has brembo slotted disk with hawk DTC-60 pads, I also did the brake ducting for front and rear. Tires wise I think we are going to use either toyo R888 or the RA1 don't know yet. and since the back glass is cracked I think we are going to put pexy glass. I almost forgot to mention that is fully caged and it has no wiring unless the necessary one for the lights, also no dash board (we did a support to hang the gauge cluster but on the future I am going with the digital cluster). And this is how I am broke now and I only have $500 to spend on my daily

[JTapper]

Details on this "race" car?

[e30m20beast]

hey man while you're at it put some NOPI stickers on yer windows. I heard those add like 25+ HP per sticker!
and dude, the best thing you can do is get one of those samurai wings. They'll make the car really fast. Don't forget to get a good fiberglass body kit off of ebay. You gota improovee the aerodynamics yo. I say, with those mods and the eta head, you'll be blasting past porches in no time. The hondas might give you a problem though.

lol!! hell no!! I wouldn't put a nasty body kit to my daily car, only a splitter under the lip and the small wing from the IS just because I like how it looks. the race car although I have %50 of the opinion because I bought it with my friend but I wouldn't put anything ridiculous and nasty to it, At the most the M3 body kit if my friend want's to put something to it

[JTapper]

hey man while you're at it put some NOPI stickers on yer windows. I heard those add like 25+ HP per sticker!
and dude, the best thing you can do is get one of those samurai wings. They'll make the car really fast. Don't forget to get a good fiberglass body kit off of ebay. You gota improovee the aerodynamics yo. I say, with those mods and the eta head, you'll be blasting past porches in no time. The hondas might give you a problem though.

Just watch out for the crub and the fents. And stay out of the burshes.

[uberCerealkiller]

hey man while you're at it put some NOPI stickers on yer windows. I heard those add like 25+ HP per sticker!
and dude, the best thing you can do is get one of those samurai wings. They'll make the car really fast. Don't forget to get a good fiberglass body kit off of ebay. You gota improovee the aerodynamics yo. I say, with those mods and the eta head, you'll be blasting past porches in no time. The hondas might give you a problem though.

[JTapper]

It's also always a good idea to save a few hundred for lessons.

[nando]

on a light duty track car the beefy ones are all you need.

actually with the right springs, the IE HD rockers are good even with a highly aggressive cam. most broken rockers are caused by inadequate spring pressure and high mileage, not RPM.

[e30m20beast]

on a light duty track car the beefy ones are all you need.

yea it sounds good, thanks for the info. BTW do you know other major parts I should worry about?

[bataangpinoy]

on a light duty track car the beefy ones are all you need.

[e30m20beast]

I was looking at the rockers and you are right so I am going to save a little more and buy them, altho I wish I could buy the -M20-Billet -Race Rocker Arm, but they are $85 bux each!!! so I might buy the "Rocker Arm M20 -Heavy Duty Race" they are $25 each, not much

[LowR3V'in]

using old rockers on a new cam? :)

[e30m20beast]

the m20b25 would not be my choice on a track car. after 5000 rpm you run the risk of snapping oem rockers. i'd rather run an m42.

and with 500 the most you can do is make a reliable m20

107.17 for the IJ crank scraper
300 for the ie beefy rockers
and theat leaves you with 93 dollars for any gaskets and bolts.

you need deep pockets or time to accumulate the parts for an m20 build.

I have the crank scraper and about the ie beefy rockers it sounds good
but first I am going to put the cam in to try it and then i'll see what else I'll go with

[bataangpinoy]

the m20b25 would not be my choice on a track car. after 5000 rpm you run the risk of snapping oem rockers. i'd rather run an m42.

and with 500 the most you can do is make a reliable m20

107.17 for the IJ crank scraper
300 for the ie beefy rockers
and theat leaves you with 93 dollars for any gaskets and bolts.

you need deep pockets or time to accumulate the parts for an m20 build.