2.7i truble shoot

[Paukert11]

Ok so I put a I head on my car, and everything together but the pulse sensor. Is that a big deal. My car will idle fine, but any time I give it gas it dies. Could this also be a bad afm??? need help. plz and I just noticed I spelt trouble wrong

[MR 325]

The pulse sensor on the plug wires is recommended but it won't keep it from revving up as it should.

[jlevie]

What exactly besides the I head have you put on? For a budget stroker you also need the I intake, throttle body, engine harness, AFM, DME, ignition wires & Cylinder ID sensor, and crank position sensor. Missing just the Cylinder ID sensor won't cause, but an intake leak or missing other parts of the budget stroker kit wil.

[Swede-E30]

Hey man,

The pulse sensor should only stop you from starting it if I remember right.

Was this done with the entire "i" top end and ECU? If you want we can swap my AFM over to your car and see what happens.


Martin

[kenika65]

what if you extremely slow press the throttle will it slowly gain rpm

[Paukert11]

ok. I put the intake, head, crank sensor, got ecu and harness, afm, and i park plugs with the pluse sensor. the crank wheel with the teeth, and i have a fuel pressure regulator. should i put that on for fuel?>>>

[kenika65]

regulator is needed and have u tried my last post...

[Paukert11]

i will try right now. and put the regulator on. its after market

[kenika65]

u wont need an aftermarket fpr sell it and get a 3 bar

[Paukert11]

ok well its set at 3 bar. but do you know whats the reason for it dieing on me???

[kenika65]

Im trying to help but u wont tell me if you can get it to rev by extremely slow advancing the throttle!

[Paukert11]

as I said. It will not rev any higher then idle, i tired what you asked me to do. i think its the afm.

[E30_fiend]

are you running the eta AFM or the i AFM? make 100% msure its the i one

[Paukert11]

I have been running the I one. but i put the eta one on just to see if there would be a diffrents. but im running the I one.
But I think the I one is crap or something. i can see the flap open and close but it still runs like shit.

[MR 325]

So try another one already! :)