ok i just stripped the shit out of my headbolt

[KillaCam]

i tried using different sockets, welding bolts on it, threading it, impact chisle, and cutting the top off(never got all the way through), channel locks, vise grips and thats it.


what should i do now.... continue cutting the bolt top off and take the head off and either dubble nut it or use channel locks to get it off.

?????????????????????????????????????????????????? ???????????????????
:hitler: :hitler: :hitler: :hitler: :hitler: :hitler: :hitler: :hitler: :hitler: :hitler: :hitler: :hitler: :hitler: :hitler::hitler::hitler::hitler:

[jlevie]

Cut the head of the bolt off, pull the head and hope that you can then get the bolt out. With the head off you can weld a nut to the bolt. If if won't come out then, I'd find another block.

[ldsbeaker]

PB Blaster, PB Blaster, and more PB Blaster.

After head is removed. You'll get it out.

[BDSax]

kroil works pretty good too

[nando]

how on earth? pics?

[payney8]

pics

[KillaCam]

lol i actually got it out 3 hours later (afterposting this thread) with the impact chisle

[MR 325]

How does this even happen ?

[KillaCam]

How does this even happen ?

its a really long story

[gregslow318i]

its a really long story

well...?

[dashboardmonkey]

its a really long story

c'mon, spill it

[E30Idea]

Story or ban

[MR 325]

Sounds like a story of not using the right tool for the right job

[Matt-B]

yea, note to self maybe? my etrox? and some torx also?

and dont cut bolt head of. drill and hole in it, and use an easy out bit

[nando]

an easy out on a head bolt? I don't think so..