A few parts I'm confused on

[Scallywagon]

What is the special elbow shaped vacuum hose that comes out of the bottom of the throttle body and plugs into the electronics / black canister with 2 nipples on it? Also, are there gaskets for these two connections:

Thermostat housing, not the one to the head, but to the top part of the housing

Passenger side of the intake manifold that connects to the fuel rail

[Scallywagon]

bump

[nando]

charcol canister and evaporative purge valve

there's an o-ring for the thermostat, but no gasket other than where the housing attaches to the head.

not sure what you mean on the fuel rail.

[hurttech]

Passenger side of the intake manifold that connects to the fuel rail

Vacuum line to the fuel pressure regulator.

[Scallywagon]

Vacuum line to the fuel pressure regulator.

yes this, connects to the FPR via vacuum hose to the pass. side of the intake mani and has that bracket in front of it too connected to the valve cover, no gasket for that either?

[Scallywagon]

charcol canister and evaporative purge valve

there's an o-ring for the thermostat, but no gasket other than where the housing attaches to the head.

not sure what you mean on the fuel rail.

so I'm looking for evaporative purge valve vacuum hose then?

[hurttech]

Real OEM is showing a gasket goes there, but no part number is listed. I'm afraid to crack my own to look.



Hes talking about that FYI. Anyone know?

[Danny]

Just use a cereal box.

[Adrian_Visser]

Well you can buy gasket sheets that you can cut your own shapes out of too.

[Scallywagon]

good shit meroki