Won't Run

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • achillies
    Mod Crazy
    • May 2009
    • 647

    #16
    I took a look at the underdash wiring...yikes!!! But the problem seem to be there. There is a red wire running from a white block to the wire bundle that seems to run through the firewall that if I wiggle it the car will start and if I wiggle it again it will just stop.

    I am such a noobie at electrical that I really dont know what to do next. THe connector to the white bolck seems ok but the other end ???? Do I take apart that wire bundle and see where it goes or is there a place underhood where that bundle terminates?

    Again...all the help has been appreciated.

    Bob
    03 325xiT/5

    Comment

    • seatown88
      Grease Monkey
      • Oct 2010
      • 331

      #17
      check out a wiring diagram for your car, I have found this invaluable while trying to figure out my no start situation.

      Comment

      • achillies
        Mod Crazy
        • May 2009
        • 647

        #18
        Thanks...I pushed the connector in harder and routed the wire and tied them up and it has been running since.....hope that does it.

        Thanks all for the help.

        Bob
        03 325xiT/5

        Comment

        Working...