Oil, temp pressure sender block

[CrazyB]

I am looking for a distribution block for oil temp and pressure senders. I saw the one on bavauto and not sure how it works meaning where it attaches.

Is there other options out there?

Also where wood you guys suggest to connect an aftermarket water temp sensor?

[reelizmpro]

I have one with a banjo bolt as well.

[CrazyB]

Have one what? where do i get it?

[reelizmpro]

I have the VDO adapter for the oil pressure sender. It only has 1 port though. You might be looking for a distribution block or something. Don't know if they have that for E30's.

[SkinnyVT]

I was planning on plugging into the stock OP switch location, use a 12x1.5 to 1/8NPT adapter and then run a line to the fender to mount all the sending units.

[CrazyB]

yeah i am looking for distribution block to connect both temp and pressure sensors to.

[Mtriple]

I have this one: http://store.vacmotorsports.com/vac-...old-p1228.aspx

[CrazyB]

Looks Like I am going to go with temp sensor in the pan drain bolt and a the bav auto adapter for pressure, now just need to figure out what do for water. i was wondering if anybody used the bleeder screw on top of the thermostat?

[brian52555]

Hey,

leatherz.com sells what you're looking for. I bought mine off a local forum member, good stuff. I have yet to install it though.

http://leatherz.com/Merchant5/merchant.mvc?Screen=PROD&Store_Code=01&Product_Code=OilBlock&Category_Code=Gauges