Ebay Cam gear

[Fernflex]

Has anyone installed the cam gear from ebay? Are they good or bad, what about quality?

http://shop.ebay.com/i.html?rt=nc&LH...=p3286.c0.m301

I have been trying to contact RM without any luck.

[whodwho]

There is a forum sponsor selling them here:

http://www.r3vlimited.com/board/showthread.php?t=167397

[Brandon12V]

Bad. The adjustable screws have been known to come loose on their own. Bad things happen.

EDIT: had no idea they "redesigned" it. Things could be different, I guess.

[Fernflex]

There is a forum sponsor selling them here:

http://www.r3vlimited.com/board/showthread.php?t=167397

I have send to pm's to him! :(

[Fernflex]

Bad. The adjustable screws have been known to come loose on their own. Bad things happen.

Ok, thanks no way Im installing them in my car!

[nando]

I have one - the quality is fine, very nice actually. I don't think the screws should come out, but I replaced mine with stainless screws anyway so they don't interfere with my cam sensor.

I've never heard of them coming apart, so I don't know what stories Brandon12v has heard..

[ss45466]

Heres what I think about these cam gears:



This was after only 2k miles, thought it was a rod knock, actually drove it hard down to the shop, didn't break which surprised me. Engine was tired, had real low compression numbers. I replaced the outer bolts with grade 8 bolts, couldn't find the inners because they are tapered. The marks were put on wrong from the factory when I got this one. I'm running a stock gear now on my 2.8 stroker, don't waste your money. They are garbage.

If you want one get a good one from PPF: http://server.pure-pf.com/webshop/pp...e493a80f8146ea

[Fernflex]

I also found this one from VAC

http://www.vacmotorsports.com/catalog/vac---m20-adjustable-cam-gear.htm